Quote:
The first is a standard mod on Mk 2 boards, don't worry about it.


Can you tell me what this mod does, or what it fixed. I'm quite curious as to what it's doing.

Also, I did leave the plastic pipes in place, the IDE was was floating around the inside of the case, but I put it back.

I also noticed on the mk2 display board, that a couple of the display pins aren't soldered. In the first group of 3 pins the inside pair isn't soldered into the board. Is this also normal?

Anyways, Thanks Rob for the info!
_________________________
Oliver mk1 30gb: 129 | mk2a 30gb: 040104126