Originally Posted By: tfabris
This means there is a more general problem with the player's hard disk, or the player's connection to the hard disk.

The other suggestions in this thread seem to indicate that you have a bad track that you need to skip. Based on the above error message, I think you have a bigger problem than that.

I think you are right. I've reinstalled 3.0A11, and hijack v488. Tried Marks instructions above, and still can't get the player software to start up correctly.

Here's a boot log:
Code:
CCC¡V
     •µ…Ɂ‰½½ÑÍÑÉ…ÁÙŹÁɁÉÁÁÁÅÅÁف¡¡Õ½•µÁ•¹½µ¥5)ÿIf there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Penguins of Linux!

e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux..................................... done, booting the kernel.
Linux version 2.2.17-rmk5-np17-empeg52-hijack-v488 (hijack@rtr.ca) (gcc version 2.95.3 20010315 (release)) #2 Fri Feb 15 10:29:26 EST 2008
Processor: Intel StrongARM-1100 revision 11
Checking for extra DRAM:
c1000000: wrote ffffffff, read e28cc001
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 9, serial number 40103696) 16MB DRAM
Command line: mem=16m
Calibrating delay loop... 207.67 BogoMIPS
Memory: 15000k/16M available (992k code, 20k reserved, 368k data, 4k init)
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 16384 bhash 16384)
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is 67706d65 'empg'
Found custom animation at offset 0x9877c
Tuner: loopback=0, ID=-1
show_message("Hijack v488 by Mark Lord")
empeg display initialised.
empeg dsp audio initialised
empeg dsp mixer initialised
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0
empeg remote control/panel button initialised.
empeg usb initialised, PDIUSBD12 id 1012
empeg state support initialised 0089/88c1 (save to d0004d80).
empeg RDS driver initialised
empeg power-pic driver initialised (first boot)
RAM disk driver initialized:  16 RAM disks of 4096K size
empeg single channel IDE
Probing primary interface...
ide_data_test: wrote 0x0000 read 0xffd0
ide_data_test: wrote 0xffff read 0xffd0
ide_data_test: wrote 0xaaaa read 0xaad0
ide_data_test: wrote 0x5555 read 0x55d0
ide_data_test: wrote 0x0000 read 0xffd0
ide_data_test: wrote 0xffff read 0xffd0
ide_data_test: wrote 0xaaaa read 0xaad0
ide_data_test: wrote 0x5555 read 0x55d0
ide_data_test: wrote 0x0000 read 0xffd0
ide_data_test: wrote 0xffff read 0xffd0
ide_data_test: wrote 0xaaaa read 0xaad0
ide_data_test: wrote 0x5555 read 0x55d0
ide_data_test: wrote 0x0000 read 0xffd0
ide_data_test: wrote 0xffff read 0xffd0
ide_data_test: wrote 0xaaaa read 0xaad0
ide_data_test: wrote 0x5555 read 0x55d0
ide_data_test: wrote 0x0000 read 0xffd0
ide_data_test: wrote 0xffff read 0xffd0
ide_data_test: wrote 0xaaaa read 0xaad0
ide_data_test: wrote 0x5555 read 0x55d0
ide_data_test: wrote 0x0000 read 0xffff
ide_data_test: wrote 0xffff read 0xffff
ide_data_test: wrote 0xaaaa read 0xaaaa
ide_data_test: wrote 0x5555 read 0x5555
hdb: IC25N060ATMR04-0, ATA DISK drive
ide_data_test: wrote 0x0000 read 0xffff
ide_data_test: wrote 0xffff read 0xffff
ide_data_test: wrote 0xaaaa read 0xaaaa
ide_data_test: wrote 0x5555 read 0x5555
hda: FUJITSU MHN2300AT, ATA DISK drive
hdb: IC25N060ATMR04-0, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: FUJITSU MHN2300AT, 28615MB w/2048kB Cache, CHS=58140/16/63
hdb: IC25N060ATMR04-0, 57231MB w/7884kB Cache, CHS=7296/255/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu)

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:28:0e:70
Partition check:
 hda: hda1 < hda5 hda6 > hda2 hda3 hda4
 hdb: hdb1 < hdb5 hdb6 > hdb2 hdb3 hdb4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 4k initempeg init 0.8
I see this is a developer image!
Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
Mounting second music partition
Remounting first music partition read-only
Remounting second music partition read-only
Press 'q' now to go into development mode. You Have Zero Seconds To Comply...
Starting player
Timezone: Atlantic/South_Georgia
Hijack: intercepting config.ini

/bin/sh: /usr/local/bin/empire: Nhijack: removed menu entry: "Hard Disk Detection"
o such fihijack: removed menu entry: "Serial Port Assignment"
le or directory
/binkhttpd: listening on port 80
/sh: execkftpd: listening on port 21
: /usr/local/bin/empire: cannot execute: No such file or directory
  player.cpp        : 587:empeg-car 3.00-alpha11 2005/07/25.
Dead temp.sensor, status=0x00
Prolux 4 empeg car - 2.1485 Jul 25 2005
Vcb: 0x40762000
show_message("0000.0 segfault err")
player(25): user memory violation at pc=0x0203f504, lr=0x00000c18 (bad address=0x4a67569c, code 2)
pc : [<0203f504>]    lr : [<00000c18>]
sp : bdfffba0  ip : cccccccd  fp : bdfffbc8
r10: 406c276c  r9 : 0000b8af  r8 : 406c2768
r7 : 00000000  r6 : 0220acd8  r5 : 00000000  r4 : 04f0f390
r3 : 4a675694  r2 : 0002e2bc  r1 : 0000160c  r0 : 4064e008
Flags: nzCv  IRQs on  FIQs on  Mode USER_32  Segment user
Control: C0F6117D  Table: C0F6117D  DAC: 00000015
Function entered at [<0203f498>] from [<02026138>]
 r10 = 00000001  r9 = 02210D20  r8 = 021B0DB4  r7 = 021B0DB4
 r6 = 0004C75C  r5 = 021B0DB4  r4 = 40676008
Function entered at [<020260f4>] from [<02026768>]
 r5 = 40676008  r4 = 00000000
Function entered at [<020266b0>] from [<0202986c>]
 r10 = 020DEA00  r8 = BDFFFCC0  r7 = 021B0DA4  r6 = 40676008
 r5 = 00000000  r4 = 00000000
Function entered at [<02029844>] from [<02028800>]
Function entered at [<0202878c>] from [<02006058>]
 r7 = 00000000  r6 = BDFFFCBC  r5 = 00000000  r4 = 02210D20
Function entered at [<02005f9c>] from [<020067c4>]
 r7 = BDFFFCBC  r6 = BDFFFCBC  r5 = 00000000  r4 = 02210D20
Function entered at [<02006750>] from [<0200673c>]
 r8 = 00000001  r7 = BDFFFCF8  r6 = 00000000  r5 = 00000000
 r4 = 02210EB4
Function entered at [<02006718>] from [<020ce108>]
Function entered at [<020ce0a8>] from [<020ce060>]
 r8 = 0000340E  r7 = 00000080  r6 = 021BE108  r5 = 02210EB4
 r4 = 00000000
Function entered at [<020ce014>] from [<020066e8>]
 r6 = 0000000E  r5 = BDFFFD4C  r4 = 02210D20
Function entered at [<020066d4>] from [<020dead4>]
Function entered at [<020dea9c>] from [<020dea8c>]
 r5 = 021D40FC  r4 = 02210D20
Function entered at [<020dea00>] from [<0211c970>]
 r5 = 02210D38  r4 = BDFFFE40
Function entered at [<0211c8a8>] from [<0215334c>]
 r4 = 00000000
Function entered at [<02151ac0>] from [<0211c6ec>]
 r8 = 021E8A5C  r7 = 021E8A48  r6 = 020DEA00  r5 = 00000005
 r4 = 00000001
Function entered at [<0211c63c>] from [<0215334c>]
 r5 = 00000000  r4 = 00000000
Function entered at [<00000074>] from [<021d1a28>]
Function entered at [<e39ffff4>] from [<eb000a3f>]
Function entered at [<2a00fef4>] from [<2a00ff00>]
show_message("0000.0 sigkill err")
Unable to handle kernel paging request at virtual address 2a00fef8
memmap = C0F60000, pgd = c0f60000
*pgd = 00000000, *pmd = 00000000
Internal error: Oops: 2
CPU: 0
pc : [<c00e53d8>]    lr : [<c0019950>]
sp : c0387f44  ip : c0387f00  fp : c0387f90
r10: 00000002  r9 : c0f980e0  r8 : 0000000c
r7 : 00000000  r6 : 2a00fef4  r5 : 2a00ff00  r4 : ea000030
r3 : 60000013  r2 : c0106284  r1 : 00000001  r0 : ea000020
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  Segment user
Control: C0F6117D  Table: C0F6117D  DAC: 00000015
Process player (pid: 25, stackpage=c0387000)
Stack:
c0387f20:                                               c0019950 c00e53d8 60000013
c0387f40: ffffffff c0f980f8 c0f938a0 c0386000  c0387fb8 4a67569c c0011be0 00000c18
c0387f60: 4a67569c 00000002 c0387fb8 00000005  4a67569c 00000000 00000002 0000b8af
c0387f80: 406c276c c0387fb4 c0387f94 c0012134  c0011984 c010497c 00000000 0220acd8
c0387fa0: 00000000 406c2768 00000000 c0387fb8  c000a0c8 c001205c 4064e008 0000160c
c0387fc0: 0002e2bc 4a675694 04f0f390 00000000  0220acd8 00000000 406c2768 0000b8af
c0387fe0: 406c276c bdfffbc8 cccccccd bdfffba0  00000c18 0203f504 20000010 ffffffff
Backtrace:
Function entered at [<c0011978>] from [<c0012134>]
 r10 = 406C276C  r9 = 0000B8AF  r8 = 00000002  r7 = 00000000
 r6 = 4A67569C  r5 = 00000005  r4 = C0387FB8
Function entered at [<c0012050>] from [<c000a0c8>]
 r8 = 406C2768  r7 = 00000000  r6 = 0220ACD8  r5 = 00000000
 r4 = C010497C
Code: ebfcd0d9 e2440010 (e5961004) e1a035a1 e59f20cc
Restored terminal settings
Remounting first music partition read-only
Remounting second music partition read-only
Dead temp.sensor, status=0x00
Abnormal player termination
Player received signal 11
Starting playTimezone: Atlantic/South_Georgia
er
Hijack: intercepting config.ini

  player.cpp        : 587:empeg-car 3.00-alpha11 2005/07/25.

Definitely some weird stuff there (IDE data test, memory violation)... Thoughts?
_________________________
-Michael

#040103696 on a shelf
Mk2a - 90 GB - Red - Illuminated buttons