Simply make sure every hole in the connector on the cable has a pin in it. At least at both ends and you can be sure it's lined up.

Possibly you have have the solder header problem aggravated by pulling it apart.
http://www.riocar.org/modules.php?op=mod...;faqent=221#221

Edit: Also if the screen is not displaying anything, unplug the IDE cable completely and make sure you get the no hard disk found error. Otherwise the problem lies somewhere else.


Edited by Shonky (15/05/2008 10:50)
_________________________
Christian
#40104192 120Gb (no longer in my E36 M3, won't fit the E46 M3)