i did some heavy vent. wkile i dried up

anyway after some diskbuilds and zero fills it all comes down to this:


empeg:/empeg/bin# cat /dev/hda > /dev/null
empeg:/empeg/bin# cat /dev/hdc > /dev/null
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=115459753, sector=115459753
end_request: I/O error, dev 03:40 (hdb), sector 115459753
cat: /dev/hdc: Input/output error
empeg:/empeg/bin#

i will be fixing the temp sensor later, so the unit will get a very close inspection while i have it open

as for the Silicone i have only used it on the drive end of the IDE cable... i could never dream of using the stuff on the mainboard.. there is no need to either as the connector is more a theight fit than on the drives
_________________________
the "monkey" who learned to check a harddrive