This is the relevant snippet from the log file:
Code:
17:11:21	#20 SPTI -1106 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x73
	Sense Qual: 0x03
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 
	Buffer x099b0040: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
17:11:21	#21 CDR -1106 File Writer.cpp, Line 303
	Power calibration error
	Z: PHILIPS SPD2513P
	
17:11:26	#22 CDR -201 File WriterStatus.cpp, Line 195
	Invalid write state
	Z: PHILIPS SPD2513P
	
17:11:26	#23 TRANSFER -18 File WriterStatus.cpp, Line 195
	Could not perform EndTrack

That sense key data would likely be very useful if you could find a service manual for the drive. I can't find one, though.

"Power calibration error" might tend to indicate that it's a hardware problem. Maybe. Do you have it set up to simulate before burning? What happens if you flip that switch?
_________________________
Bitt Faulk