There is a dead link found under:
http://www.riocar.org/modules.php?op=mod...mp;faqent=87#87
DEAD LINK:
http://empeg.comms.net/php/showflat.php?...rt=all&vc=1

Full story for whom is willing to read:
After pimping my dashboard, followed by some wiring nightmare my most precious MK2 stopped going into standby mode and now switches off immediately.
Initially there was a loose 12V cable from the sled (Pin #8) which I did solder on again. And it did work. But after some excessive power-on and offs (I was testing some other stuff...) it stopped going into standby completely.

What I did to resolve this issue:

Double checked the wiring.
Checked if 12V is really provided.
Checked the external fuse attached on the empeg harness.
Read the FAQ
Connected to Emplode
Changed "Standby"Time from 60 to 20 sec.
Synced


What I intend to do:
triple check the wiring
Check if a diode or a transistor in my player has been blown. -> Please if you could resurrect the dead link or animate it's content back to live. In order to see, for which diodes and transistors I have to look out in the player?

And lastly for those who read through my gibberish:
A BIG HONEST THANK YOU TO THE EMPEG COMMUNITY! I REALLY LOOOOVE MY EMPEG AND THE AID AND SUPPORT I WAS GIVEN HERE ON THIS PLATFORM IS VERY MUCH APPRECIATED.

Thank you!
KeN