The smaller Pelican case is the 1200. If you chop off the 1400 case ~1/2" in front of where the empegs panel would be in this picture you have the size of the 1200. The remote fits stuck down in the foam between the player and case wall. By experience I know you can also put a jewel CD case in it (on top of the player) or an RCA->3.5mm cable (not too long), when you cut out so that the top of the empeg is level with the top of the foam block. The middle foam block is actually ~10mm (bit less than 1/2") thicker than that, so I used one 'row' (the pre-gridded variant) thickness of the removed part of the block to pad the bottom, raising the player, otherwise the top and bottom foam part wouldn't 'grasp' the player when the case was closed.

/Michael