szfrom empeg side (it's there), some terminal emulator supporting Zmodem protocol on PC side (e.g. HyperTerminal on Windows.).

Do the following:

- Load developer image (use emplode for that)
- Connect empeg to PC using supplied serial cable. (in the case you did not get it, it is a simple null-modem cable with no modem control wires: 2-3, 3-2, 7-7)
- Configure HyperTerminal to 115200, 8 data bits, one stop bit, no parity, no flow control (it's in Edit->properties->Connect to tab->configure button)
- Press q [enter] to stop the player
- Choose the directory to receive files (Transfer->Receive file); cancel when finished. You will see some garbage in the terminal window.
- cd /drive0/fids
- sz *0 (or sz * if you want tag files as well). You may get 'command line too long' error message, in which case you will have to do that piecemeal, such as sz [123]*0 etc
- Enjoy the picture for the moment, then go continue your normal life for a week or so (this transfers around 1GB a day)

Good luck!


Dragi "Bonzi" Raos
Zagreb, Croatia
Q#5196, MkII#80000376, 18GB green