MKl hard drive upgrade help | Technical / Troubleshooting | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » Technical / Troubleshooting » MKl hard drive upgrade help

Page 1 of 3

1

Topic Options

#159212 - 05/05/2003 19:37 MKl hard drive upgrade help
Laura pooh-bah Registered: 16/06/2000 Posts: 1682 Loc: Greenhills, Ohio	Ok, this is what I have got from hyper terminal, what does it mean? empeg-car v0.04 19990121 ([email protected]) If there is anyone present who wants to upgrade the flash, let them speak now, or forever hold their peace...it seems not. Let fly the Penguins of Linux! e000 v1.04 Copying kernel... Calling linux kernel... Uncompressing Linux........................ done, booting the kernel. Linux version 2.2.14-rmk5-np17-empeg52 (rob@aphex) (gcc version 2.95.3 20010315 (release)) #9 Tue Apr 1 18:47:56 BST 2003 Processor: Intel StrongARM-1100 revision 9 NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp. empeg-car player (hardware revision 4, serial number 00017) Command line: mem=8m Calibrating delay loop... 207.67 BogoMIPS Memory: 7324k/8M available (580k code, 20k reserved, 264k data, 4k init) Dentry hash table entries: 1024 (order 1, 8k) Buffer cache hash table entries: 8192 (order 3, 32k) Page cache hash table entries: 2048 (order 1, 8k) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 Starting kswapd v 1.5 SA1100 serial driver version 4.27 with no serial options enabled ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART Signature is ffffffff 'ÿÿÿÿ' empeg display initialised. empeg dsp audio initialised empeg dsp mixer initialised empeg dsp initialised empeg remote control/panel button support initialised (Using FIQs). empeg usb initialised, USBN9602 revision 1 empeg state support initialised 0089/8893 (save to d0005180). empeg RDS driver initialised empeg power state driver initialised Linux video capture interface: v1.00 empeg FM radio driver (Philips). RAM disk driver initialized: 16 RAM disks of 4096K size empeg dual channel IDE Probing primary interface... No drives found, retrying... No drives found, retrying... hda: IC25N080ATMR04-0, ATA DISK drive No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... Registering drives... ide0 at 0x040-0x047,0x078 on irq 7 hda: IC25N080ATMR04-0, 76319MB w/7884kB Cache, CHS=9729/255/63 empeg-flash driver initialized Partition check: hda: hda1 < hda5 hda6 > hda2 hda3 hda4 RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 320 blocks [1 disk] into ram disk... done. VFS: Mounted root (ext2 filesystem). empeg-pump v0.03 (19980601) Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 4k initempeg init 0.8 I see this is a developer image! Mounting proc Mounting first music partition Tried to mount /dev/hda4 as reiserfs but got error 19 VFS: Can't find an ext2 filesystem on dev ide0(3,4). Tried to mount /dev/hda4 as ext2 but got error 22 Error mounting partitions (possibly already mounted) Remounting first music partition read-only No primary hard disk Remounting second music partition read-only No secondary hard disk Press 'q' now to go into development mode. You Have Zero Seconds To ComplùStarti ng player player.cpp : 385:empeg-car 2.00 2003/04/01. ! tags.cpp : 61:Failed to open tags (0xc0041002). Prolux 4 empeg car - 2.1425 Mar 26 2003 Vcb: 0x4028d000 _________________________ Laura MKI #017/90 whatever
Top

#159213 - 05/05/2003 19:38 Re: MKl hard drive upgrade help [Re: Laura]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14493 Loc: Canada	It means you have one working 80GB hard drive, with nothing on it yet (?) EDIT: actually, there IS something on it.. I just missed the partition check first time I looked. Does it work? Edited by mlord (05/05/2003 19:39)
Top

#159214 - 05/05/2003 19:40 Re: MKl hard drive upgrade help [Re: mlord]
Laura pooh-bah Registered: 16/06/2000 Posts: 1682 Loc: Greenhills, Ohio	Well, then that is good, that's what it has. But for some reason emplode will not open so I wasn't sure. It keeps giving me that "performing illegal operation" crap. _________________________ Laura MKI #017/90 whatever
Top

#159215 - 05/05/2003 19:41 Re: MKl hard drive upgrade help [Re: Laura]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14493 Loc: Canada	In reply to: Tried to mount /dev/hda4 as reiserfs but got error 19 VFS: Can't find an ext2 filesystem on dev ide0(3,4). Tried to mount /dev/hda4 as ext2 but got error 22 Mmm.. have you run the diskbuilder .upgrade on that drive to prepare it for Empeg use?
Top

#159216 - 05/05/2003 19:48 Re: MKl hard drive upgrade help [Re: mlord]
Laura pooh-bah Registered: 16/06/2000 Posts: 1682 Loc: Greenhills, Ohio	Yes but I wasn't sure if it ran right or not. Maybe I should try again? _________________________ Laura MKI #017/90 whatever
Top

#159217 - 05/05/2003 19:49 Re: MKl hard drive upgrade help [Re: Laura]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14493 Loc: Canada	Might as well.. the music partitions /dev/hda4 does not appear to have been completely created on it. Cheers
Top

#159218 - 05/05/2003 19:52 Re: MKl hard drive upgrade help [Re: mlord]
Laura pooh-bah Registered: 16/06/2000 Posts: 1682 Loc: Greenhills, Ohio	Applying it again now. I'll let you know how it goes. _________________________ Laura MKI #017/90 whatever
Top

#159219 - 05/05/2003 19:58 Re: MKl hard drive upgrade help [Re: mlord]
Laura pooh-bah Registered: 16/06/2000 Posts: 1682 Loc: Greenhills, Ohio	Ok, here is what it said after reapplying the builder image. hda: hda1 < hda5 hda6 > hda2 hda3 hda4 RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 320 blocks [1 disk] into ram disk... done. VFS: Mounted root (ext2 filesystem). empeg-pump v0.03 (19980601) Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 4k initVFS: Can't find an ext2 filesystem on dev i de0(3,4). mount: wrong fs type, bad option, bad superblock on /dev/hda4, or too many mounted file systems warning: can't open /etc/mtab: No such file or directory umount: /drive0: not mounted Making first drive... mke2fs 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09 ext2fs_check_if_mount: No such file or directory while determining whether /dev/ hda4 is mounted. no room for private writable mapping error: -12 /dev/hda4: Memory allocation failed while setting up superblock hdstress.cpp 189 ( 14): Poll result=0 on fd=5 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning down. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning up. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Speed checking /dev/hda3 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Read/write of 8Mb took 7.47 seconds hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning down. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning up. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning down. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning up. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Drive length is 156301488 blocks, seek testing hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Seek test complete: 38.00 seconds. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning down. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning up. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning down. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning up. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Speed checking /dev/hda3 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Read/write of 8Mb took 7.54 seconds hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning down. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning up. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning down. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning up. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Drive length is 156301488 blocks, seek testing empeg-car v0.04 19990121 ([email protected]) If there is anyone present who wants to upgrade the flash, let them speak now, or forever hold their peace...it seems not. Let fly the Penguins of Linux! e000 v1.04 Copying kernel... Calling linux kernel... Uncompressing Linux........................ done, booting the kernel. Linux version 2.2.14-rmk5-np17-empeg52 (rob@aphex) (gcc version 2.95.3 20010315 (release)) #9 Tue Apr 1 18:47:56 BST 2003 Processor: Intel StrongARM-1100 revision 9 NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp. empeg-car player (hardware revision 4, serial number 00017) Command line: mem=8m Calibrating delay loop... 207.67 BogoMIPS Memory: 7324k/8M available (580k code, 20k reserved, 264k data, 4k init) Dentry hash table entries: 1024 (order 1, 8k) Buffer cache hash table entries: 8192 (order 3, 32k) Page cache hash table entries: 2048 (order 1, 8k) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 Starting kswapd v 1.5 SA1100 serial driver version 4.27 with no serial options enabled ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART Signature is ffffffff 'ÿÿÿÿ' empeg display initialised. empeg dsp audio initialised empeg dsp mixer initialised empeg dsp initialised empeg remote control/panel button support initialised (Using FIQs). empeg usb initialised, USBN9602 revision 1 empeg state support initialised 0089/8893 (save to d0005080). empeg RDS driver initialised empeg power state driver initialised Linux video capture interface: v1.00 empeg FM radio driver (Philips). RAM disk driver initialized: 16 RAM disks of 4096K size empeg dual channel IDE Probing primary interface... No drives found, retrying... No drives found, retrying... hda: IC25N080ATMR04-0, ATA DISK drive No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... Registering drives... ide0 at 0x040-0x047,0x078 on irq 7 hda: IC25N080ATMR04-0, 76319MB w/7884kB Cache, CHS=9729/255/63 empeg-flash driver initialized Partition check: hda: hda1 < hda5 hda6 > hda2 hda3 hda4 RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 320 blocks [1 disk] into ram disk... done. VFS: Mounted root (ext2 filesystem). empeg-pump v0.03 (19980601) Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 4k initempeg init 0.8 I see this is a developer image! Mounting proc Mounting first music partition Tried to mount /dev/hda4 as reiserfs but got error 19 VFS: Can't find an ext2 filesystem on dev ide0(3,4). Tried to mount /dev/hda4 as ext2 but got error 22 Error mounting partitions (possibly already mounted) Remounting first music partition read-only No primary hard disk Remounting second music partition read-only No secondary hard disk Press 'q' now to go into development mode. You Have Zero Seconds To ComplùStarti ng player player.cpp : 385:empeg-car 2.00 2003/04/01. ! tags.cpp : 61:Failed to open tags (0xc0041002). Prolux 4 empeg car - 2.1425 Mar 26 2003 Vcb: 0x4028d000 empeg-car v0.04 19990121 ([email protected]) If there is anyone present who wants to upgrade the flash, let them speak now, or forever hold their peace...it seems not. Let fly the Penguins of Linux! e000 v1.04 Copying kernel... Calling linux kernel... Uncompressing Linux........................ done, booting the kernel. Linux version 2.2.14-rmk5-np17-empeg52 (rob@aphex) (gcc version 2.95.3 20010315 (release)) #9 Tue Apr 1 18:47:56 BST 2003 Processor: Intel StrongARM-1100 revision 9 NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp. empeg-car player (hardware revision 4, serial number 00017) Command line: mem=8m Calibrating delay loop... 207.67 BogoMIPS Memory: 7324k/8M available (580k code, 20k reserved, 264k data, 4k init) Dentry hash table entries: 1024 (order 1, 8k) Buffer cache hash table entries: 8192 (order 3, 32k) Page cache hash table entries: 2048 (order 1, 8k) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 Starting kswapd v 1.5 SA1100 serial driver version 4.27 with no serial options enabled ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART Signature is ffffffff 'ÿÿÿÿ' empeg display initialised. empeg dsp audio initialised empeg dsp mixer initialised empeg dsp initialised empeg remote control/panel button support initialised (Using FIQs). empeg usb initialised, USBN9602 revision 1 empeg state support initialised 0089/8893 (save to d0005100). empeg RDS driver initialised empeg power state driver initialised Linux video capture interface: v1.00 empeg FM radio driver (Philips). RAM disk driver initialized: 16 RAM disks of 4096K size empeg dual channel IDE Probing primary interface... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... Registering drives... Probing primary interface... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... empeg-car v0.04 19990121 ([email protected]) If there is anyone present who wants to upgrade the flash, let them speak now, or forever hold their peace...it seems not. Let fly the Penguins of Linux! e000 v1.04 Copying kernel... Calling linux kernel... Uncompressing Linux........................ done, booting the kernel. Linux version 2.2.14-rmk5-np17-empeg52 (rob@aphex) (gcc version 2.95.3 20010315 (release)) #9 Tue Apr 1 18:47:56 BST 2003 Processor: Intel StrongARM-1100 revision 9 NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp. empeg-car player (hardware revision 4, serial number 00017) Command line: mem=8m Calibrating delay loop... 207.67 BogoMIPS Memory: 7324k/8M available (580k code, 20k reserved, 264k data, 4k init) Dentry hash table entries: 1024 (order 1, 8k) Buffer cache hash table entries: 8192 (order 3, 32k) Page cache hash table entries: 2048 (order 1, 8k) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 Starting kswapd v 1.5 SA1100 serial driver version 4.27 with no serial options enabled ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART Signature is ffffffff 'ÿÿÿÿ' empeg display initialised. empeg dsp audio initialised empeg dsp mixer initialised empeg dsp initialised empeg remote control/panel button support initialised (Using FIQs). empeg usb initialised, USBN9602 revision 1 empeg state support initialised 0089/8893 (save to d0005100). empeg RDS driver initialised empeg power state driver initialised Linux video capture interface: v1.00 empeg FM radio driver (Philips). RAM disk driver initialized: 16 RAM disks of 4096K size empeg dual channel IDE Probing primary interface... No drives found, retrying... No drives found, retrying... hda: IBM-DJSA-220, ATA DISK drive No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... Registering drives... ide0 at 0x040-0x047,0x078 on irq 7 hda: IBM-DJSA-220, 19077MB w/1874kB Cache, CHS=38760/16/63 empeg-flash driver initialized Partition check: hda: hda1 < hda5 hda6 > hda2 hda3 hda4 RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 320 blocks [1 disk] into ram disk... done. VFS: Mounted root (ext2 filesystem). empeg-pump v0.03 (19980601) Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 4k initempeg init 0.8 I see this is a developer image! Mounting proc Mounting first music partition Tried to mount /dev/hda4 as reiserfs but got error 19 Mounting second music partition Tried to mount /dev/hdc4 but got error 15 Error mounting partitions (possibly already mounted) Remounting first music partition read-only Remounting second music partition read-only No secondary hard disk Press 'q' now to go into development mode. You Have Zero Seconds To ComStarting player player.cpp : 385:empeg-car 2.00-beta11 2002/02/08. empeg-car v0.04 19990121 ([email protected]) If there is anyone present who wants to upgrade the flash, let them speak now, or forever hold their peace...it seems not. Let fly the Penguins of Linux! e000 v1.04 Copying kernel... Calling linux kernel... Uncompressing Linux........................ done, booting the kernel. Linux version 2.2.14-rmk5-np17-empeg52 (rob@aphex) (gcc version 2.95.3 20010315 (release)) #9 Tue Apr 1 18:47:56 BST 2003 Processor: Intel StrongARM-1100 revision 9 NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp. empeg-car player (hardware revision 4, serial number 00017) Command line: mem=8m Calibrating delay loop... 207.67 BogoMIPS Memory: 7324k/8M available (580k code, 20k reserved, 264k data, 4k init) Dentry hash table entries: 1024 (order 1, 8k) Buffer cache hash table entries: 8192 (order 3, 32k) Page cache hash table entries: 2048 (order 1, 8k) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 Starting kswapd v 1.5 SA1100 serial driver version 4.27 with no serial options enabled ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART Signature is ffffffff 'ÿÿÿÿ' empeg display initialised. empeg dsp audio initialised empeg dsp mixer initialised empeg dsp initialised empeg remote control/panel button support initialised (Using FIQs). empeg usb initialised, USBN9602 revision 1 empeg state support initialised 0089/8893 (save to d0005100). empeg RDS driver initialised empeg power state driver initialised Linux video capture interface: v1.00 empeg FM radio driver (Philips). RAM disk driver initialized: 16 RAM disks of 4096K size empeg dual channel IDE Probing primary interface... No drives found, retrying... No drives found, retrying... hda: IBM-DJSA-220, ATA DISK drive No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... Registering drives... ide0 at 0x040-0x047,0x078 on irq 7 hda: IBM-DJSA-220, 19077MB w/1874kB Cache, CHS=38760/16/63 empeg-flash driver initialized Partition check: hda: hda1 < hda5 hda6 > hda2 hda3 hda4 RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 320 blocks [1 disk] into ram disk... done. VFS: Mounted root (ext2 filesystem). empeg-pump v0.03 (19980601) Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 4k initempeg init 0.8 I see this is a developer image! Mounting proc Mounting first music partition Tried to mount /dev/hda4 as reiserfs but got error 19 Mounting second music partition Tried to mount /dev/hdc4 but got error 15 Error mounting partitions (possibly already mounted) Remounting first music partition read-only Remounting second music partition read-only No secondary hard disk Press 'q' now to go into development mode. You Have Zero Seconds To ComðStarting player player.cpp : 385:empeg-car 2.00-beta11 2002/02/08. ! tunedb_disk.cpp :1224:Database size mismatch error. Prolux 4 empeg car - 2.1425 Feb 7 2002 Vcb: 0x4028d000 empeg-car v0.04 19990121 ([email protected]) If there is anyone present who wants to upgrade the flash, let them speak now, or forever hold their peace...it seems not. Let fly the Penguins of Linux! e000 v1.04 Copying kernel... Calling linux kernel... Uncompressing Linux........................ done, booting the kernel. Linux version 2.2.14-rmk5-np17-empeg52 (rob@aphex) (gcc version 2.95.3 20010315 (release)) #9 Tue Apr 1 18:47:56 BST 2003 Processor: Intel StrongARM-1100 revision 9 NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp. empeg-car player (hardware revision 4, serial number 00017) Command line: mem=8m Calibrating delay loop... 207.67 BogoMIPS Memory: 7324k/8M available (580k code, 20k reserved, 264k data, 4k init) Dentry hash table entries: 1024 (order 1, 8k) Buffer cache hash table entries: 8192 (order 3, 32k) Page cache hash table entries: 2048 (order 1, 8k) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 Starting kswapd v 1.5 SA1100 serial driver version 4.27 with no serial options enabled ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART Signature is ffffffff 'ÿÿÿÿ' empeg display initialised. empeg dsp audio initialised empeg dsp mixer initialised empeg dsp initialised empeg remote control/panel button support initialised (Using FIQs). empeg usb initialised, USBN9602 revision 1 empeg state support initialised 0089/8893 (save to d0005180). empeg RDS driver initialised empeg power state driver initialised Linux video capture interface: v1.00 empeg FM radio driver (Philips). RAM disk driver initialized: 16 RAM disks of 4096K size empeg dual channel IDE Probing primary interface... No drives found, retrying... No drives found, retrying... hda: IC25N080ATMR04-0, ATA DISK drive No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... No drives found, retrying... Registering drives... ide0 at 0x040-0x047,0x078 on irq 7 hda: IC25N080ATMR04-0, 76319MB w/7884kB Cache, CHS=9729/255/63 empeg-flash driver initialized Partition check: hda: hda1 < hda5 hda6 > hda2 hda3 hda4 RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 320 blocks [1 disk] into ram disk... done. VFS: Mounted root (ext2 filesystem). empeg-pump v0.03 (19980601) Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 4k initempeg init 0.8 I see this is a developer image! Mounting proc Mounting first music partition Tried to mount /dev/hda4 as reiserfs but got error 19 VFS: Can't find an ext2 filesystem on dev ide0(3,4). Tried to mount /dev/hda4 as ext2 but got error 22 Error mounting partitions (possibly already mounted) Remounting first music partition read-only No primary hard disk Remounting second music partition read-only No secondary hard disk Press 'q' now to go into development mode. You Have Zero Seconds To ComplùStarti ng player player.cpp : 385:empeg-car 2.00 2003/04/01. ! tags.cpp : 61:Failed to open tags (0xc0041002). Prolux 4 empeg car - 2.1425 Mar 26 2003 Vcb: 0x4028d000 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Speed checking /dev/hda3 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Read/write of 8Mb took 7.50 seconds hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning down. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning up. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning down. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning up. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Drive length is 156301488 blocks, seek testing hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Seek test complete: 38.31 seconds. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning down. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 Stressing /dev/hda: Spinning up. hdstress.cpp 189 ( 14): Poll result=0 on fd=5 hdstress.cpp 189 ( 14): Poll result=0 on fd=5 _________________________ Laura MKI #017/90 whatever
Top

#159220 - 05/05/2003 20:06 Re: MKl hard drive upgrade help [Re: Laura]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14493 Loc: Canada	Ouch: In reply to: hda4 is mounted. no room for private writable mapping error: -12 /dev/hda4: Memory allocation failed while setting up superblock Basically, it ran out of memory (Mk1 has only 8MB) while trying to create the filesystem for the music partition. The drive is just plain too big for the diskbuilder. I suppose one might be able to create the filesystem "by hand", with parameters that require less memory. But first, try the Mk2 diskbuilder on it in a mk2 machine (ugh!). Once that succeeds (it will), then install the Mk1 .developer image onto it. If all that fails, we'll have to do it the "hard way". Cheers (?)
Top

#159221 - 05/05/2003 20:16 Re: MKl hard drive upgrade help [Re: mlord]
Laura pooh-bah Registered: 16/06/2000 Posts: 1682 Loc: Greenhills, Ohio	Ah, I must be the first to try and put an 80GB in the MKl. I'll have to wait until tomorrow night to try and build the disk in the MKll first. I'll update the thread then. I'm glad to know that it isn't a problem with the hard drive itself. edit: Thanks for the help Mark Edited by Laura (05/05/2003 20:18) _________________________ Laura MKI #017/90 whatever
Top

#159222 - 05/05/2003 22:55 Re: MKl hard drive upgrade help [Re: Laura]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31597 Loc: Seattle, WA	I'll have to wait until tomorrow night to try and build the disk in the MKll first. Good idea. That should work. Run the builder with the drive in a Mk2, reapply the mk2 developer upgrade while it's still in the Mk2 so you don't fry whatever disk you plug into the Mk2 afterward, then plug it into the Mk1 and apply developer Mk1 onto it on its first powerup. Tricky, but I think it'll work. Mark, that was a quick diagnostic. Cool. Nice catch. Does this not bode well for the Mk1 in terms of upgrades? Or could code tweaks to the mk1 version of the builder image take care of it? As I recall, the builder images are going to need an update to allow bigger than 127gb anyway, maybe we can bribe the right people with curry and/or beer? _________________________ Tony Fabris
Top

#159223 - 06/05/2003 02:09 Re: MKl hard drive upgrade help [Re: tfabris]
pgrzelak carpal tunnel Registered: 15/08/2000 Posts: 4859 Loc: New Jersey, USA	Ouch! Sorry about all the trouble. I have been recommending the 80GB drives - I did not know that they would not build "new, out of the packet" on a Mark 1. _________________________ *Paul Grzelak* 200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
Top

#159224 - 06/05/2003 03:18 Re: MKl hard drive upgrade help [Re: pgrzelak]
Laura pooh-bah Registered: 16/06/2000 Posts: 1682 Loc: Greenhills, Ohio	That's ok. I consider it an honor to get to be the first to experiment with getting an 80GB working in the MKl, I like a challenge. _________________________ Laura MKI #017/90 whatever
Top

#159225 - 06/05/2003 03:47 Re: MKl hard drive upgrade help [Re: Laura]
pgrzelak carpal tunnel Registered: 15/08/2000 Posts: 4859 Loc: New Jersey, USA	Would it be possible to build a swap partition first and have the builder software be able to key off that? I would think that the partitions themselves can be built easily by the builder code, it is just the new filesystem generation that seems to be locking up. It would probably require a rebuild of the builder software in order to get it to use swap, though... A thought... _________________________ *Paul Grzelak* 200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
Top

#159226 - 06/05/2003 03:48 Re: MKl hard drive upgrade help [Re: tfabris]
peter carpal tunnel Registered: 13/07/2000 Posts: 4180 Loc: Cambridge, England	Does this not bode well for the Mk1 in terms of upgrades? Or could code tweaks to the mk1 version of the builder image take care of it? Oh 'eck. I suppose we have run mkswap by that stage, so we could enable swap for making the music partition. I'd be worried, though, that a Mark 1 won't have enough memory for the size of database occasioned by 80 or 160 gigabytes of music... Peter
Top

#159227 - 06/05/2003 04:02 Re: MKl hard drive upgrade help [Re: peter]
Laura pooh-bah Registered: 16/06/2000 Posts: 1682 Loc: Greenhills, Ohio	Do you know what the largest size drive that it could handle with the memory that it has? _________________________ Laura MKI #017/90 whatever
Top

#159228 - 06/05/2003 04:14 Re: MKl hard drive upgrade help [Re: Laura]
pgrzelak carpal tunnel Registered: 15/08/2000 Posts: 4859 Loc: New Jersey, USA	That would likely depend on the number of files, the amount of compression, etc. From what I have seen, and if this is a good estimate, my 120GB of music only generates a database file of about 2.5MB. Now, I don't know what other memory is in use, but I would be interesting to find out... _________________________ *Paul Grzelak* 200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
Top

#159229 - 06/05/2003 05:25 Re: MKl hard drive upgrade help [Re: pgrzelak]
peter carpal tunnel Registered: 13/07/2000 Posts: 4180 Loc: Cambridge, England	From what I have seen, and if this is a good estimate, my 120GB of music only generates a database file of about 2.5MB. Ah. Laura could have a problem then. A Mark 1 has a total of 2.5M available for caching and database. If the database alone is larger than that, the player will not start. If the database is larger than about 1.75M, there will be so little cache that the player can never spin the disk down. Peter
Top

#159230 - 06/05/2003 07:35 Re: MKl hard drive upgrade help [Re: pgrzelak]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14493 Loc: Canada	The immediate limit here is not the number of files (which is currently ZERO when it fails), but the memory that the filesystem maker wants. By doing the diskbuilder in a Mk2, this step will be avoided, and a subsequent Mk1 consumer image (or developer) .upgrade would complete the install... will probably even work! THEN the database and file counts become the new limit. Cheers
Top

#159231 - 06/05/2003 07:35 Re: MKl hard drive upgrade help [Re: Laura]
larry818 old hand Registered: 01/10/2002 Posts: 1039 Loc: Fullerton, Calif.	Hi, I put a 60gb in my Mark 1 a couple of months ago and ran across this problem. What I did do (and posted about it here) was to just run builder in the Mark II and put the drive back in the M1, apply player, and all is well.
Top

#159232 - 06/05/2003 07:37 Re: MKl hard drive upgrade help [Re: mlord]
wfaulk carpal tunnel Registered: 25/12/2000 Posts: 16706 Loc: Raleigh, NC US	The immediate limit here is not the number of files I believe that Paul's post was in response to Peter's:I'd be worried, though, that a Mark 1 won't have enough memory for the size of database occasioned by 80 or 160 gigabytes of music... _________________________ Bitt Faulk
Top

#159233 - 06/05/2003 07:40 Re: MKl hard drive upgrade help [Re: wfaulk]
pgrzelak carpal tunnel Registered: 15/08/2000 Posts: 4859 Loc: New Jersey, USA	Oops. Yes. I read the BBS in flat mode, as opposed to threaded. I keep forgetting about that... _________________________ *Paul Grzelak* 200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
Top

#159234 - 06/05/2003 07:40 Re: MKl hard drive upgrade help [Re: Laura]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14493 Loc: Canada	Here's an easy thing to try, if you have not already simply moved the disk to a Mk2 for the diskbuilder step: Install the Mk1 developer image, with the disk still in the Mk1. This will fail at some point, but ignore it. Then, reboot the player with the serial link hooked up, and hit 'q' or 'control^C' to quit back to a shell prompt. From the shell prompt, try: mkswap /dev/hda6 swapon /dev/hda6 mke2fs /dev/hda4 <--- Peter can tell us the exact parameters to use here Then reboot and see what happens. Cheers Edited by mlord (06/05/2003 07:41)
Top

#159235 - 06/05/2003 07:42 Re: MKl hard drive upgrade help [Re: mlord]
pgrzelak carpal tunnel Registered: 15/08/2000 Posts: 4859 Loc: New Jersey, USA	I always prefer a software solution than digging out a screwdriver and allen wrench. _________________________ *Paul Grzelak* 200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
Top

#159236 - 06/05/2003 10:26 Re: MKl hard drive upgrade help [Re: peter]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31597 Loc: Seattle, WA	I'd be worried, though, that a Mark 1 won't have enough memory for the size of database occasioned by 80 or 160 gigabytes of music... Well, if they encode everything as WAV or 320cbr, then probably no big deal. _________________________ Tony Fabris
Top

#159237 - 08/05/2003 05:31 Re: MKl hard drive upgrade help [Re: mlord]
altman carpal tunnel Registered: 19/05/1999 Posts: 3457 Loc: Palo Alto, CA	In theory, you can solder 4 more RAM chips onto a Mk1 on the underside, then enable them in the SA1100 and tell linux it has a full 16MBytes. I've not tried it, but it definitely should work. Not sure what the player would make of it, as it wouldn't be expecting a Mk1 to have that much ram... Hugo
Top

#159238 - 08/05/2003 10:25 Re: MKl hard drive upgrade help [Re: mlord]
Laura pooh-bah Registered: 16/06/2000 Posts: 1682 Loc: Greenhills, Ohio	I've been busy and haven't tried it yet but I should get around to it this weekend. I'll go ahead and try building the drive in the MKll first. As I only have enough songs at the moment to fill a little more than half the space, hopefully the database won't be too big for the memory to handle. _________________________ Laura MKI #017/90 whatever
Top

#159239 - 08/05/2003 20:23 Re: MKl hard drive upgrade help [Re: altman]
tanstaafl. carpal tunnel Registered: 08/07/1999 Posts: 5549 Loc: Ajijic, Mexico	Not sure what the player would make of it, as it wouldn't be expecting a Mk1 to have that much ram... Hugo, in your wildest imaginings, when you were designing the Mark I did you ever think the day would come when people would be trying to cram 80 GB (or even 160 GB) of storage into it? tanstaafl. _________________________ "There Ain't No Such Thing As A Free Lunch"
Top

#159240 - 10/05/2003 15:51 Re: MKl hard drive upgrade help [Re: tanstaafl.]
altman carpal tunnel Registered: 19/05/1999 Posts: 3457 Loc: Palo Alto, CA	No, but we did want to allow the player to be fully expanded. The factory didn't like the pads on the bottom of the boards (like the mk1) as they kept getting shorted during flow soldering of the through-hole parts... so we had to take them off for the mk2. Thinking back, maybe the ring-o-lights is less useful than the option of taking a mk2a to 48Mbytes (6 chips) Hugo Hugo
Top

#159241 - 10/05/2003 17:08 Re: MKl hard drive upgrade help [Re: altman]
pgrzelak carpal tunnel Registered: 15/08/2000 Posts: 4859 Loc: New Jersey, USA	I don't know about that. The ring-o-lights is a very nice feature... By the way, did you get the drive built? _________________________ *Paul Grzelak* 200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
Top

Page 1 of 3

1

View All Topics