empeg-car bootstrap v1.02 20001106 (
[email protected])
If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Penguins of Linux!
e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux..................................... done, booting the kerne
l.
Linux version 2.2.17-rmk5-np17-empeg52-hijack-v335 (root@ibbm) (gcc version 2.95
.3 20010315 (release)) #2 Tue May 13 15:01:19 EDT 2003
Processor: Intel StrongARM-1100 revision 11
NetWinder Floating Point Emulator V0.94.1 (c)
empeg-car player (hardware revision 9, serial number 30103138)
Command line: mem=16m
Calibrating delay loop... 207.67 BogoMIPS
Memory: 14996k/16M available (996k code, 20k reserved, 368k data, 4k init)
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
ttyS01 at 0xf80
TCP: Hash tables configured (ehash 16384 bhash 16384)ze 86 (adjustment 48Hijack:
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
empeg dsp audio initial
IrCOMM protocol (Dag Brattli)Starti
empeg dsp mixer
Starting kswapd v 1.5epting config.in
SA1100 serial driver version 4.27 with no serial options enabledalisedsignal 6ti
Using non
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UARTa0k: intercepting config.inipp :12
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
! playe
em
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UARTment 48)eived signal
Signature is 636f6972 'rioc'
Remounting fi
Found custom animation at offset 0x9b720alised, PDIUSBD12 id 1012:UnabRestored t
Tuner: loopback=0, ID=-1
Scheduling custom logo.
Remounting seco
SMC9194: SMC91C94(r:9) at 0x4
empeg usb initialised, PDIUSBD12 id 1012d7:26:0c:4ayerly
empeg state support initialised 0089/88c1 (save to d0005180).
Hijack: intercepting config.inimounting second music
empeg RDS driver initialised
Starti
empeg power-pic driver initialised (first boot)
hda: hda1 < hda5 hda6 >
RAM disk driver initialized: 16 RAM disks of 4096K size
! player.cpp
RAMDISK: ext2 filesystem found
empeg single channel IDE signal 6layer
Probing primary interface...
hda: FUJITSU MHM2200AT, ATA
Ab
empeg-flash driver initialized0601)rly
smc chip id/revision 0x3349
Press Ctrl-A to enter pum
smc9194.c:v0.12 03/06/96 by Erik Stahlman (
[email protected])
': not a valid identifieropts: `Op
SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:26:0c:4
Using non-s
Saved AC volume was 11adjustment 48)rcepting
2
Partition check:
V
Freeing unused kernel memory: 4k initempeg init 0.8
I see this is a developer image!
Restored te
Mounting procsd signal 6fi
Mounting first music partition
Using non-st
No secondary hard disk
Remounting first music partition read-onlydary hard diskrst music partition re
Remounting second music partition read-onlyAbnormal player terminationon read-onlymina
No secondary hard disk
Press 'q' now to go into development modeStarting player
H
Remounting second mus
Hijack: intercepting config.inip
': not a valid identifieropts: `Option
No seconda
Saved AC volume was 11
Re
Volume=11 terminal
hijack_exec("/drive0/var/ttsclock t2"), rc=0 (okay)
starting notify thread...
! player.cpp
notify thread started (tid=1026)...
Remounting first music partitio
Using non-standard cache size 86 (adjustment 48)
Remountin
lyrics thread started (tid=2051)... 48)Starting player
emphatic Restored terminal settings
U
Hija
Remounting second music partition read-only
No secondary hard disk
Abnormal player termination
Player received signal 6
Starting player
Hijack: intercepting config.ini
Using non-standard cache size 86 (adjustment 48)
! player.cpp :1240:Unab€Restored terminal settings
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
Abnormal player termination
Player received signal 6
Starting player
Hijack: intercepting config.ini
Using non-standard cache size 86 (adjustment 48)
! player.cpp :1240:Unable to load default string table.ýRestored terminal
settings
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
it loop in final part:
Using non-standard cache size 86 (adjustment 48)
! player.cpp :1240:Unable to load default string table.ýRestored terminal
settings
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
Jemplode and emplode don't have access
i cannot upgrade kernel
pls help me
I use WinXP only and 2.0beta13 + hijack 335
Previous Topic
Index