Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Page 2 of 2 < 1 2
Topic Options
#237684 - 06/11/2004 12:30 Re: broken (dead) empeg: what to do to ? [Re: genixia]
pgrzelak
carpal tunnel

Registered: 15/08/2000
Posts: 4859
Loc: New Jersey, USA
At this point, it might be worth while to have someone else look at the unit and do some exploratory surgery.
_________________________
Paul Grzelak
200GB with 48MB RAM, Illuminated Buttons and Digital Outputs

Top
#237685 - 06/11/2004 13:37 Re: broken (dead) empeg: what to do to ? [Re: pgrzelak]
genixia
Carpal Tunnel

Registered: 08/02/2002
Posts: 3411
Yeah, I think it is. But Shapeless is in Italy, so it'd make sense for Rob S to do it.
_________________________
Mk2a 60GB Blue. Serial 030102962 sig.mp3: File Format not Valid.

Top
#237686 - 07/11/2004 02:47 Re: broken (dead) empeg: what to do to ? [Re: genixia]
shapeless
journeyman

Registered: 09/08/2002
Posts: 50
Loc: Italy
Quote:
Oh, hang on...didn't he determine earlier that the display board worked in another player?


the display unit (the cable and everything after) is working. i've tested it with another working motherboard (thanks Taym!).

my motherboard have the same problem with another working display unit (brand new cable and display board).

the fuses are all ok and it plays music.
_________________________

shapeless

MK2a | #010101588 | 2x 120GB SSD  | Hijack v526 | v3.0a11 | > melpomene <
MK2   | #090000581 | 60 & 100GB HD | v2final.mk2 | v2.01 | > backup <
radio | all colors lens | greenlights LBSSK buttons | KCA-R6A + ERC-1A remotes | carry cases | empeg sticker!

Top
#237687 - 07/11/2004 02:49 Re: broken (dead) empeg: what to do to ? [Re: maczrool]
shapeless
journeyman

Registered: 09/08/2002
Posts: 50
Loc: Italy
Quote:
The ICT PEEL that goes bad is located behind the VFD. Peel it back from the display board and at least do a visual inspection.

Hope this helps,
Stu


thank you Stu, but my display unit (cable and board) is working with another motherboard so the ICT must be ok. thanks anyway.
_________________________

shapeless

MK2a | #010101588 | 2x 120GB SSD  | Hijack v526 | v3.0a11 | > melpomene <
MK2   | #090000581 | 60 & 100GB HD | v2final.mk2 | v2.01 | > backup <
radio | all colors lens | greenlights LBSSK buttons | KCA-R6A + ERC-1A remotes | carry cases | empeg sticker!

Top
#237688 - 07/11/2004 03:39 Re: broken (dead) empeg: what to do to ? [Re: shapeless]
genixia
Carpal Tunnel

Registered: 08/02/2002
Posts: 3411
Have you contacted Rob Schofield? ("schofiel")
_________________________
Mk2a 60GB Blue. Serial 030102962 sig.mp3: File Format not Valid.

Top
#237689 - 07/11/2004 12:55 Re: broken (dead) empeg: what to do to ? [Re: shapeless]
mlord
carpal tunnel

Registered: 29/08/2000
Posts: 14496
Loc: Canada
If it's still not working in January, you can contact me then, and we'll arrange for you to mail me the mainboard (only!!) of the player and I'll probe and compare signals with one of my three working ones here.

Cheers

Top
#237690 - 07/11/2004 18:30 Re: broken (dead) empeg: what to do to ? [Re: genixia]
shapeless
journeyman

Registered: 09/08/2002
Posts: 50
Loc: Italy
Quote:
Have you contacted Rob Schofield? ("schofiel")


first time 28/09/2004 and got the only one reply, so i've sent infos 30/09/2004, than asked again 4/10/2004, again 8/10/2004, again 12/10/2004, the last time 06/11/2004 with:

Hi Rob,
I'm very sorry to disturb you another time but i've just tried with genixia and mark lord asking for the possibility to repair my empeg, these are their replies:
(your messages)
so i'm still here asking if there is a possibility for you to repair my empeg, if not, *please* tell me, so i can ask genixia another time. please, thanks a lot Rob.
-Patrizio


i've still no reply.
i'm absolutely sorry to disturb you guys but i've not choice but buy another unit or change carplayer.
_________________________

shapeless

MK2a | #010101588 | 2x 120GB SSD  | Hijack v526 | v3.0a11 | > melpomene <
MK2   | #090000581 | 60 & 100GB HD | v2final.mk2 | v2.01 | > backup <
radio | all colors lens | greenlights LBSSK buttons | KCA-R6A + ERC-1A remotes | carry cases | empeg sticker!

Top
#237691 - 07/11/2004 18:36 Re: broken (dead) empeg: what to do to ? [Re: mlord]
shapeless
journeyman

Registered: 09/08/2002
Posts: 50
Loc: Italy
Quote:
If it's still not working in January, you can contact me then, and we'll arrange for you to mail me the mainboard (only!!) of the player and I'll probe and compare signals with one of my three working ones here.



thank you very much Mark, i'll wait. btw if there is something more that i can do to understand (if not solve) the problem we can try again until next three months.
_________________________

shapeless

MK2a | #010101588 | 2x 120GB SSD  | Hijack v526 | v3.0a11 | > melpomene <
MK2   | #090000581 | 60 & 100GB HD | v2final.mk2 | v2.01 | > backup <
radio | all colors lens | greenlights LBSSK buttons | KCA-R6A + ERC-1A remotes | carry cases | empeg sticker!

Top
#237692 - 08/11/2004 07:40 Re: broken (dead) empeg: what to do to ? [Re: genixia]
tanstaafl.
carpal tunnel

Registered: 08/07/1999
Posts: 5549
Loc: Ajijic, Mexico
Have you contacted Rob Schofield? ("schofiel")


Last I heard (admittedly, at least a month ago, and the information came to me second-hand) Rob was having some sort of problem with his internet connection.

tanstaafl.
_________________________
"There Ain't No Such Thing As A Free Lunch"

Top
#237693 - 08/11/2004 13:44 Re: broken (dead) empeg: what to do to ? [Re: tanstaafl.]
shapeless
journeyman

Registered: 09/08/2002
Posts: 50
Loc: Italy
He's back and replied me, I hope we'll do something for my player.
_________________________

shapeless

MK2a | #010101588 | 2x 120GB SSD  | Hijack v526 | v3.0a11 | > melpomene <
MK2   | #090000581 | 60 & 100GB HD | v2final.mk2 | v2.01 | > backup <
radio | all colors lens | greenlights LBSSK buttons | KCA-R6A + ERC-1A remotes | carry cases | empeg sticker!

Top
Page 2 of 2 < 1 2