Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#275420 - 01/02/2006 20:01 US Rio Central
burnswannabe
new poster

Registered: 22/05/2005
Posts: 13
Just browsing on ebay and spotted this central, 800 and receiver for sale.
Anyone from here?
linky

Top
#275421 - 01/02/2006 20:58 Re: US Rio Central [Re: burnswannabe]
matthew_k
pooh-bah

Registered: 12/02/2002
Posts: 2298
Loc: Berkeley, California
All I know is the reserve is over $175. It looks like a nice package though.

Matthew

Top
#275422 - 04/02/2006 08:32 Re: US Rio Central [Re: burnswannabe]
thrasher
enthusiast

Registered: 10/01/2002
Posts: 362
Thanks for the heads up, I can't wait to get it.
_________________________
040103958 60g

Top
#275423 - 10/02/2006 04:49 Re: US Rio Central [Re: burnswannabe]
thrasher
enthusiast

Registered: 10/01/2002
Posts: 362
Got all the stuff from him today. I hooked it up to my sterio and it sounds great but the tray will not olpen. looks like someone broke it trying to get the hard drive out. The little plastic tabs that hold the hard drive and tray on the bottom are broken. I found them in the case. I am going to try to supper glue them back on.
_________________________
040103958 60g

Top
#275424 - 10/02/2006 15:24 Re: US Rio Central [Re: thrasher]
tfabris
carpal tunnel

Registered: 20/12/1999
Posts: 31597
Loc: Seattle, WA
The broken tabs and the tray-not-opening thing might be two different issues.

I have a prototype Central where the tray won't open when using the front-panel button. But if I use the remote control and go into the menu, and say "record from CD tray", "multiple CD mode", then it opens the tray.

The problem is that some of the front panel buttons have stopped working on that Central. Despite checking every contact and tracing continuity on every control line (even with a schematic obtained from Hugo himself), I was never able to solve the problem. I was forced to use that menu sequence each time I wanted to rip a CD.

So anyway, check to see if the tray will open when you use that menu sequence.
_________________________
Tony Fabris

Top
#275425 - 10/02/2006 16:59 Re: US Rio Central [Re: tfabris]
thrasher
enthusiast

Registered: 10/01/2002
Posts: 362
The eject button is working. I took the top off and lined up the tray and pushed the eject button and it olpened just fine. I am gonna try to secure it down with somthing.
_________________________
040103958 60g

Top
#275426 - 10/02/2006 18:34 Re: US Rio Central [Re: thrasher]
tfabris
carpal tunnel

Registered: 20/12/1999
Posts: 31597
Loc: Seattle, WA
Okay, good. At least it's a solvable problem.
_________________________
Tony Fabris

Top
#275427 - 10/02/2006 23:23 Re: US Rio Central [Re: thrasher]
The Central Guy
enthusiast

Registered: 18/03/2002
Posts: 225
Loc: San Diego, California USA
Not sure if it's a common problem for those internal plastic tabs to break off during shipping, but I also had that happen to one of the units I purchased on eBay...I was able to get it working and get the CD/HD tray lined up correctly...

Not sure if it happened during shipping or if the previous user hosered it up...But I slapped in a 120GB drive on a removable caddy with the ribbon extension cable and I'm rippin' and burnin'.....Good luck,

Randy
_________________________
Happy owner of 2 Centrals, 2 Empegs Mk2a 160GB, 1 Empeg Mk2a 60 GB, a Rio Riot, 4 Rio Receivers, and two 1GB iPod Shuffles...

Top
#275428 - 11/02/2006 16:33 Re: US Rio Central [Re: The Central Guy]
thrasher
enthusiast

Registered: 10/01/2002
Posts: 362
Got the tabs glued back on and it's working great now. Thanks for everyones help.
_________________________
040103958 60g

Top