Removing wires from sled connector to save space | Installation Notes

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » Installation Notes » Removing wires from sled connector to save space

Topic Options

#66626 - 04/02/2002 12:10 Removing wires from sled connector to save space
jules member Registered: 21/01/2002 Posts: 174 Loc: Indiana USA	Hi, I have a problem with very limited space in my car installation and do not plan to use the serial, tuner, mute, or microphone. If I remove the wires for these from the sled connector, will I encounter any problems? Also, what functionality do I loose if I connect both the permanent power (yellow) and ignition sense (orange) to switched power? (I assume I'll be rebooting a lot but that doesn't bother me). Will really appreciate any info. Thanks. I had posted this msg in the technical forum cause I didn't realized there was a dedicated installation forum.
Top

#66627 - 04/02/2002 12:24 Re: Removing wires from sled connector to save space [Re: jules]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31600 Loc: Seattle, WA	I had posted this msg in the technical forum cause I didn't realized there was a dedicated installation forum. That's OK. I'll lock this thread here now and point people to the ongoing discussion in the Technical forum here: http://empeg.comms.net/php/showflat.php?Cat=&Board=empeg_tech&Number=64857 _________________________ Tony Fabris
Top