I'll try to be as complete with my info as possible.
Problem:
My empeg will not turn on with display in the car. It will at home. I put the empeg in the sled and turn on the car. The standby light comes on and starts to blink. I can also hear the drives spinning and reading. I hit some buttons on the remote and when I took the empeg in the house and plugged it in, it was obvious that I had done something with the remote.
No sound comes from the speakers and the standby light continues to blink. I have disconnected my amps from the battery and the result is still the same.
Other Info:
I just replaced an amp and rewired everything, as well as building a new sub box. I just put in an a/d/s amp for the front 2 speakers and used my current Blaupunkt amp for the subs. Everything seems to be hooked up properly.
Background:
I have build serveral different configurations for this same car (2002 WRX) over the last several years. I have had different amps and setups. This is the only time I have had this particular problem. The empeg was working properly in the car less than 2 weeks ago (the last time I had it in the car)
Shouldn't the empeg at least turn on no matter what amps are running in the car?
ugh. this whole thing is starting to drive me insane. I just want some music in my car again!!
thanks for any input.
_________________________
---------
//matt