Unoffical empeg BBS

Quick Links: Empeg FAQ | Software | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs | Addons: Eutronix | Cases

Topic Options
#84815 - 01/04/2002 16:05 Woodgrain Fascia
lamer
journeyman

Registered: 30/01/2002
Posts: 87
Loc: Texas
I thought I read something about some woodgrain fascias a while back. Any info on them would be appreciated.

Cory
_________________________
MK2a 160GB

11 Years later, these Mk2a units still rock...

Top
#84816 - 02/04/2002 09:28 Re: Woodgrain Fascia [Re: lamer]
lamer
journeyman

Registered: 30/01/2002
Posts: 87
Loc: Texas
Maybe I meant woodgrain faceplate?
_________________________
MK2a 160GB

11 Years later, these Mk2a units still rock...

Top
#84817 - 02/04/2002 09:42 Re: Woodgrain Fascia [Re: lamer]
wfaulk
carpal tunnel

Registered: 25/12/2000
Posts: 16706
Loc: Raleigh, NC US
CruzThs was making and selling them. I don't think we've heard from him in a while, but check out this thread.
_________________________
Bitt Faulk

Top
#84818 - 02/04/2002 16:29 Re: Woodgrain Fascia [Re: wfaulk]
loren
carpal tunnel

Registered: 23/08/2000
Posts: 3826
Loc: SLC, UT, USA
I met up with Rob (CruzThs) on Saturday (we're going to the Spring Break Buggy Blast ( http://www.sbbb.net ) tomorrow) and he said he'd taken his rig down and it was a pain to setup. I finally got to see a wood faceplate up close and DAMN are they smooth looking... even though it was an unlaquered one and i generally hate wood. If Rob had enough orders to justify it, maybe he'd start making them again. I'd say he needs a page on Riocar.org similar to the colored lenses from Darkstorm. Most people probably haven't even seen that they are available.
_________________________
|| loren ||

Top
#84819 - 02/04/2002 18:23 Re: Woodgrain Fascia [Re: loren]
pgrzelak
carpal tunnel

Registered: 15/08/2000
Posts: 4859
Loc: New Jersey, USA
Greetings!

This is truely a pity. I have the custom wood fascia on my two primary units, and it really looks sharp!!! Combined with the smoke lens, it is a work of art. I need to take another photo of the empeg in-dash...
_________________________
Paul Grzelak
200GB with 48MB RAM, Illuminated Buttons and Digital Outputs

Top
#84820 - 03/04/2002 07:19 Re: Woodgrain Fascia [Re: loren]
rob
carpal tunnel

Registered: 21/05/1999
Posts: 5328
Loc: Cambridge UK
I hope he had already made the three fascias he owes us for the right to use our CAD

Rob

Top
#84821 - 09/04/2002 17:00 Re: Woodgrain Fascia [Re: rob]
loren
carpal tunnel

Registered: 23/08/2000
Posts: 3826
Loc: SLC, UT, USA
You're next on the list, from what he told me. =] He's resetting up the rig as he said in another thread somewhere.
_________________________
|| loren ||

Top