Okay folks. I'm building a home docking component box or whatever you wanna call it. I've got all the parts, and I need a little help on the power part. As you can see here:

I've got the ethernet and AC plug working great with the sled. Now for hooking the power up. I want to use the power brick inside of the box. So, i went to the electronics store today (Electronics Plus in San Rafael... they have EVERYTHING) and picked up all the parts.

The AC power will come into the back of the box with this connector:

(fuse at bottom is optional)
and here's the back:

and run through this rocker switch:

here's the back:

(spade 1 to the left, 2 to the right)
and end up with this socket:

where i'll plug in the power brick.

SO...
Only having the most basic of knowledge about all this (which should probably answer my question... but alas...) and not wanting to fry myself or anything else... Can anyone tell me what wires to connect where on each connector? If this were DC i think i'd have it... but i've never worked with AC. Or would it be the same hookup?

Help! =]
Thanks all.