Quote:
I just bent the tabs outward a little and that did the trick for me.


I did this on my _stock_ sled for a Mk2a. The sled has a little 'give' in it such that it can bend out of square slightly if its mounting hole is a tight fit - in my case it's tighter on the sides rather than at the top. Bear in mind also that the locking tabs effectively push in on the sled...The amount that the sled bends is barely noticeable, but it can be enough to affect the empeg's fit.

[edited for grammar]


Edited by genixia (21/09/2004 03:29)
_________________________
Mk2a 60GB Blue. Serial 030102962 sig.mp3: File Format not Valid.