Ok. Verified my ethernet on the Empeg works. Now I want to make it wirless.

I have the Apple Airport. And a Lucent Wavelan card.

What IP does the Empeg need to be?

Someone said the Airport will work for this right out of the box, no reconfiguring.

What settings does the WaveLan card need to be?

My setup is as follows:
3 computers
10/100 hub connecting these
my main computer has a 56k modem
a secondary computer has the WaveLan card
All computer surf the internet with All Aboard software
All computers have static IP's 192.168.x.y
The WaveLan card is set to 'ANY' on network name
& get a 10.0.1.x number from the Airport
The Wavelan software shows they see each other.

Now, from which computer(s) can I run and use Emplode?
I would like to be able to use two. The main machine and the one with the WaveLan card.

With the Airport connected to the Empeg(should the link light on the Empeg be on, it isn't), Emplode cannot see the Empeg from either machine. I have tried all the setting I can think of.

All I can say at this point is HELP!!!
I have tried

Proud Owner of MK2 080000558 - 18gb Blue