I'm on v462 now and am much happier with it all now.

I would still be interested to see what changes you made to the adapter, as at the moment the only change I made was to cut powered aerial and feed it to my amp remote. So if you do manage to track down the details, send them over.

Is it normal for an empeg and/or Scooby for it to take 20 seconds for the empeg to detect the ignition being turned off. The same issue means that if you:

- turn off the ignition
- remove the empeg
- come back a few minutes later
- reinsert the empeg

it then turns on straight away, rather than waiting for the ignition. If you don't then turn on the ignition it then turns off again when the ignition voltage drops low enough.

I have to troubleshoot the tuner now, I'm getting just about no signal at the moment (I tried giving the Scooby harness aerial wire 12V in case there was an amp, which didn't help). I'll have to dig out my other tuner and see if it has the same problem.

Time to go and read up on tuner troubleshooting.