Okay, now it's dead again:

empeg-car bootstrap v1.02 20001106 ([email protected]). done.guins of Linux!
If there is anyone present who wants to upgrade the flash, let them speak now,ed

e000 v1.04/drive1/fi
Copying ker
VFS: Mount
or forever hold their peace...it seems not. Let fly the Penguins of Linux!0.03 (19980601)
Uncompressing Linux......
Press Ctrl-A to enter pump...VF

e000 v1.04oot (ext2
Copying kernel...ly.s/1ea70ive0/fi
Calling linux kernel...
Uncompressing Linux..................................... done, booting the kerneux
Trying to unmount old root ... okayack-v417 ([email protected]) (gcc versi
Freei
l.un
Linux version 2.2.17-rmk5-np17-empeg52-hijack-v417 ([email protected]) (gcc version


/drive1/
2.95.3 20010315 (re
2.95.3 20010315 (release)) #2 Sat Jan 15 19:12:21 EST 2005
/drive1/fids/1ea80
Processor: Intel StrongARM-1100 re

Based upon Swansea University Computer Society NET3.039
Based upon Swansea University Computer Society N
NET4: Linux TCP/IP 1.0 for NET4.0
/dri
IP Protocols: ICMP, UDP, TCPLinux TCP/IP 1.0 for NET4.0
TCP: Hash tables configured (ehash 16384 bhash 16384)(irq = 15) is a SA1100 UART
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)ive0/fids/1eb60
Starting kswapd v 1.58050000 (irq = 17) is
SA1100 serial driver version 4.27 with no serial options enabled
ttyS02 at 0xf80300
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART30 -> /drive0/fids/fd30ids/6
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
Signature is 206f6972
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
empeg
empeg dsp initialisedBD12 id 1012s/1ec00 -
empeg audio-in initialised, CS4231A revision a0
empeg remote control/panel button initialised./88c1 (save to d0005c00).
empeg usb initialised, PDIUSBD12 id 1012/drive1/fids/fd
/drive1/f
empeg state support initialised 0089/88c1 (save to d0005f80).
empeg power-pic driver initialised (first bo
empeg RDS driver initialised
empeg power-pic driver initialised (first boot)
Probing primary interface...
hda: FUJITSU MHT2060AT PL, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: FUJITSU MHT2060AT PL, 57231MB w/8192kB Cache, CHS=7296/255/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:26:0b:6
5
Partition check:
hda:hda: read_intr: status=0x59
hda: read_intr: error=0x40
end_request: I/O error, dev 03:00 (hda), sector 0
unable to read partition table
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...attempt to access beyond end of device
03:05: rw=0, want=2, limit=0
dev 03:05 blksize=1024 blocknr=1 sector=2 size=1024 count=1
EXT2-fs: unable to read super