Well, generally a double din slot is just that, two slots. I have a Toyota with a double slot, and well, actually, on my model, I have three slots, one in the upper dash. And two in front of the gear shifter. So the empeg sits up high in the dash, and my previous changer controller unit sits lower down. The empeg would not fit as it wouldnt be able to fully slide out of the sled without hitting the gear shift.

So comparing apples to oranges, you should be able to fit two units into that double slot. and usually that din is a cage that comes out of the dash, so you could then take a empeg sled and your previous/current head unit and drop them into the cage to see if it would fit. It would only be about an hours worth of work to avoid a weekend worth of trouble.

My thoughts...

Smoker_Man
#080000449 MkII - 36Gb Blue