Quote:
..
empeg dsp audio initialised
i2c: Failed to receive ACK for data!
i2c_write: device select failed
i2c: Failed to receive ACK for data!
i2c_write: device select failed
i2c: Failed to receive ACK for data!
i2c_write: device select failed
i2c: Failed to receive ACK for data!
i2c_write: device select failed
i2c: Failed to receive ACK for data!
i2c_write: device select failed
i2c: Failed to receive ACK for data!
i2c_write: device select failed
i2c: Failed to receive ACK for data!
i2c_write: device select failed
I2C write failed (fff, d223)


I have a mostly-dead player here that gives those messages. Everything between the SA1100 and the DSP chip looks good on my logic analyser, so my only conclusion thus far is that the DSP chip has a dead i2c line. Maybe, maybe not though. It was intermittent at first, but now does it every time.

We need to hear from RobS and PCA on this one.