Well, thats what I thought first off too. I pulled the lid off and the cable was seated perfectly fine on the drive and the mainboard. I pulled the cable off and looked close at it and it kind of looked like the connector wasn't fully pressed onto the ribbon cable. So I took a pair of plyers and gently squeezed the connector all the way across so the cable was well seated on the connector. I plugged it all back in and I got the same thing. I guess when I get home tonight I could try the connector for the second drive and see if that changes anything. I looked at the connector on the mainboard and it looks like it's attached (soldered) just fine. I didn't see any traces being pulled up or anything.

Any other suggestions?