Originally Posted By: mlord
It still all looks normal.
Code:
Stalk: in=02 01 ff 00 == no button
Stalk: in=02 01 16 17 == 00000031
Stalk: out=02 01 16 17 == 00000031
Stalk: in=02 01 ff 00 == 80000031
..


Oh.. wait a sec.. 00000031 is the KSource+Shift button (KSSource).

I think you are either (1) pushing in the outer part of the end of the stalk (the "shift" collar), or perhaps it is *stuck* in.

The button on the end of the stalk (the KSource button) should be flush with the end of the stalk, not protruding.

But when the "shift collar" is pushed/stuck in, then the Ksource button will stick out by 2-3mm.

Check that on your stalk.