With a half-inch hole, I don't know if the RJ45 plugs will fit through the hole or not
I measured. 12mm, or .47 inches. Three hundredths of an inch to spare, and if I know Victor (my contractor) his masonry bit will be bent enough that the hole will actually come out closer to 9/16ths then half an inch.
Originally Posted By: mlord
One caveat for drilling: apart from steel, what else is embedded in that concrete floor? Any pipes, wires?
Not where we'll be drilling. The steel... just hope we miss it.
tanstaafl.
_________________________
"There Ain't No Such Thing As A Free Lunch"
Previous Topic
Index
