Hi all. Wanted to post this to the group to see if anyone else has had a similar problem.

After reading a load of posts about Displayserver, I wanted to fire it up on my mk2. (Background: have had empegs since Mk1 serial: 00042. Recently started getting back into the cool extras of the hardware / software). I originally had Developer image 1.01 and installed ds2b2 with no problem (didn't add custom kernel). I found that I was having a problem with the getfid function, which are what the Index test1 and test2 links call. I upgraded to the developer image 1.03 and tried again (with the custom kernel), got the same results. Haven't tried the 2.0 beta images yet... Here are details of the problem.

When I click on Index test1 or Index test2, I get a blank page in the browser and error messages on the empeg over the serial line as follows:

ds2: memory violation at pc=0x40073894, lr=0x40073638 (bad address=0x00000000, c

ode 2)

pc : [<40073894>]    lr : [<40073638>]

sp : bfffd688  ip : 400ff764  fp : bfffd69c

r10: 00000000  r9 : 00000000  r8 : 00000000

r7 : 00000000  r6 : 00000000  r5 : 00000000  r4 : 00000000

r3 : 00000000  r2 : 020086c0  r1 : 00000000  r0 : 00000000

Flags: nZCv  IRQs on  FIQs on  Mode USER_32  Segment user

Control: C823D17D  Table: C823D17D  DAC: 00000015

Function entered at [<40073624>] from [<02004414>]

 r5 = 00000000  r4 = 00000000

Function entered at [<0200416c>] from [<02006808>]

 r10 = 400FF128  r9 = 02007F08  r8 = 02008230  r7 = 02000CB0

 r6 = 4000C2A8  r5 = 00000001  r4 = 02011EE4

Function entered at [<02004a14>] from [<020073a4>]

 r10 = 400FF128  r9 = 02007F08  r8 = 02008230  r7 = 02000CB0

 r6 = 4000C2A8  r5 = 00000001  r4 = 02011EE4

Function entered at [<020072a4>] from [<02007eb0>]

Function entered at [<02007b54>] from [<02008148>]

Function entered at [<02007f08>] from [<40037040>]

 r4 = BFFFFE24

Function entered at [<40036ee4>] from [<0200111c>]

 r10 = 4001D858  r9 = 00000000  r8 = 00000000  r7 = 00000000

 r6 = 020010F8  r5 = 00000000  r4 = 4001E5EC

I'm attaching the html output (actually just javascript). Interestingly, the next Playlist that was to be setup in the script was called
_Singles. I wondered about the _, so I took it out, then the output changed, in fact, it ended even earlier at fidinfo[18][8], which it got past before, not sure if that helps.

Thanks,
Chris