I do have the empeg version of the Mk2. So, is it not physically possible to up the ram? Would the empeg guys want to retrofit for cash? :-)

Are there any other differences between empeg Mk2 and the Rio? I might want to sell this one and get more ram.

Okay, going back to 1.1 gave me different results, but in some ways, the same.

I now actually get an html page, with a few playlists on it, but the page hangs and I get the following on the serial line:

displayserver: memory violation at pc=0x40073894, lr=0x40073638 (bad address=0x0

0000000, code 2)

pc : [<40073894>]    lr : [<40073638>]

sp : bfffefb4  ip : 400ff764  fp : bfffefc8

r10: 400ff128  r9 : 02003604  r8 : 02004020

r7 : 02000b50  r6 : 4000c2a8  r5 : 00000000  r4 : bffffe14

r3 : 00000000  r2 : 02004148  r1 : 00000000  r0 : 00000000

Flags: nZCv  IRQs on  FIQs on  Mode USER_32  Segment user

Control: D022D17D  Table: D022D17D  DAC: 00000015

Function entered at [<40073624>] from [<02002214>]

 r5 = 00000001  r4 = BFFFFE14

Function entered at [<02001e50>] from [<020024a0>]

Function entered at [<02002414>] from [<02003e5c>]

Function entered at [<02003604>] from [<40037040>]

 r4 = BFFFFE14

Function entered at [<40036ee4>] from [<02000f6c>]

 r10 = 4001D858  r9 = 00000000  r8 = 00000000  r7 = 00000000

 r6 = 02000F48  r5 = 00000000  r4 = 4001E5EC

It hangs on the playlist right after the "Singles" playlist. That list has 328 tunes, if that helps. And actually, the reason I get the html page just
seems
that it's setup differently, there's not a large javascript block at the begining of it.

Thanks for your input so far. I'd love to get this straightened out.


I've attached the resulting html page.

Chris