Hugo,

I really don't understand what you are saying here ...

I have turned the volume down, and yes, if you turn it down, it works out much better, however, by turning the volume down, then the normalization between the head units CD/RADIO and the AUX IN are totally different. In other words, I have to crank up the head unit to almost 75% or 80% when using the EMP to get the same volume that I can get at 50% when playing from the head units CD/RADIO.

Like I say, I am sure it is a case of the output voltage being too high on the EMPEG. When I hooked up my AC power cable to the empeg, and then use the 1v outputs on the back of the empeg to connect to my NAK, I can set the EMP to 0db, and everything works awesome.

One idea that I had was to use a PHOENIX GOLD PDL1 Line Driver. I was thinking that maybe that device would work correctly. Has a variable control on it to change the output voltage up to 8volts. However, I don't know if the input voltage is 4v, if you could reduce it to 1v with this device.

Any other ideas?

Chris Zimmerman
Simple Dialup - Owner
[email protected]