Hugo,

Well, we conjured up a ground today to ground the left/right to the case. It didn't make any difference. BTW - I talked to my shop today. And they did not have any cables for this application.

Okay, that aside, I did take a look at lowering the volume even more. What I did come up with today was that if I lower the volume to -16db, it does sound excellent, with no distortion.

I am assuming that at this point, the old possible explaination is that it is due to the 4v outputs on the EMPEG.

I have talked to Phoenix Gold, and they make a PDL1 Line Driver. It will take a signal and boost it up to 8v, or atinuate it down to .1v. I am going to try one of those inline between the EMPEG and the NAK today to see if that works.

Any suggestions on this?



Chris Zimmerman
Simple Dialup - Owner
[email protected]