I guess it could be either way, that is a kit or prebuilt. The prebuilt ones would all be hand assembled by myself. Some of the components are hard to find, so a kit might be of interest to some people. Either way, you're going to have to solder (yourself) a ribbon cable to the Empeg board to feed the necessary signals into the dig. out board. If there are individual components you are interested in, I suppose I could sell those too.

Depending on quantity produced, I think a kit might go for around $60-$80 US, and a completed board for a $100-$120. These might come down of coarse if there are enough preorders. First, though, I must finish the prototype. We'll see how it goes.

Stu