Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#214918 - 29/04/2004 02:16 HD 80GB Toshiba upgrade issues, ext2 not found??
ratscrew
new poster

Registered: 30/10/2000
Posts: 12
I am having problems getting my new 80 gig Toshiba drive to install correctly. (model mk8025gas). I am simply trying to replace my factory 20 gig drive with this new drive.

Applying the upgrade seems to work (pumping partions/ complete) and I immediately open up hyperterminal per the directions.

The drive is recognized (as hda correctly) but further on down the text, it says no primary drive.

The directions say it should start formatting the disk, but I have not seen this happen yet.

Here is the print out of the info on my hyper terminal.................................................................................



If there is anyone present who wants to upgrade the flash, let them speak now,
(it'
No primary har
or forever hold their peace...it seems not. Let fly the Penguins of Linux!seco
bash: e2fsck: command not foundempeg init 0.8

e000 v1.04
Copying kernel...eg:/dev# rw
Calling linux kernel...No secondary ha
Uncompressing Linux..................................... done, booting the kerne
Restart code received
l.
e
Linux version 2.2.14-rmk5-np17-empeg52 (rob@aphex) (gcc version 2.95.3 20010315
empeg:/dev# rwm
mount: /drive0 not mounted
(release)) #11 Tue Apr 1 18:49:59 BST 2003
Processor: Intel StrongARM-1100 revision 11gs.cpp
mount: /drive0 not mounted
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel C

Buffer cache hash table entries: 16384 (order 4, 64k)



˙If there is
empeg:/drive0# ls0x4054d
Page cache hash table entries: 4096 (order 2, 16k)/drive0# ls -a
en
. .. f
POSIX conformance testing by UNIFIXgss
Linux NET4.0 for Linux 2.2
Parallelizi
Based upon Swansea University Computer Society NET3.039


No
empeg:/drive0#
NET4: Linux TCP/IP 1.0 for NET4.0rive0# cd .. read-onlyp1

empeg:/bin# hdstres: 61:
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0
empeg:/bin# hdstress
empeg remote control/panel button initialised.
N
Nn
Nn
Ni
Prolux 4 empeg
empeg usb initialised, PDIUSBD12 id 1012ed checking /dev/hda3
empeg state support initialised 0089/88c1 (save to d0005800).
Ni
Nt
Nl
Ne
empeg RDS driver initialised
Read/write of 8Mb too
empeg power-pic driver initialised (first boot)
Remounting
hdstress.cpp 189 ( 6
RAM disk driver initialized: 16 RAM disks of 4096K size
empeg single channel IDEa: Spinn
hda: hda1 < hda5 hda6 > hda2 hda3 hda4
hdstress.cpp 189 (
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...okay
Freeing unused kernel memory: 4k initempeg init 0.8
I see this is a developer image!
Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
VFS: Can't find an ext2 filesystem on dev ide0(3,4).
Tried to mount /dev/hda4 as ext2 but got error 22
Error mounting partitions (possibly already mounted)
Remounting first music partition read-only
No primary hard disk
Remounting second music partition read-only
No secondary hard disk
Press 'q' now to go into development mode. You Have Zero Seconds To ComplůStarti
ng player
player.cpp : 385:empeg-car 2.00 2003/04/01.
! tags.cpp : 61:Failed to open tags (0xc0041002).
Prolux 4 empeg car - 2.1434 Mar 26 2003
Vcb: 0x4054d000



I am not using any jumpers on the drive since it is the only drive. I am concerned over this line...

VFS: Can't find an ext2 filesystem on dev ide0(3,4).

as it seems like the one that starts my problems....

can anyone assist me on this issue?

( i have tried deleting all partitions created to start the update fresh, and sure enough all partitions 1-6 are created on the drive, but i still get the no primary drive error...)

Chris

Top
#214919 - 29/04/2004 02:56 Re: HD 80GB Toshiba upgrade issues, ext2 not found?? [Re: ratscrew]
Roger
carpal tunnel

Registered: 18/01/2000
Posts: 5683
Loc: London, UK
Was this log taken with Hyperterminal? If so, can you do that again, but this time, use the Transfer/Capture menu option to save the log to a file: Choose a file, and then turn on the player.

Hyperterminal's scroll back buffer is about as sane as a ferret with advanced dementia.
_________________________
-- roger

Top
#214920 - 29/04/2004 03:16 Re: HD 80GB Toshiba upgrade issues, ext2 not found?? [Re: Roger]
ratscrew
new poster

Registered: 30/10/2000
Posts: 12
here is the more readable version (though this is not the first boot after the update... i will try that and post that again now)



empeg-car bootstrap v1.00 20000601 ([email protected])
If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Penguins of Linux!

e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux..................................... done, booting the kernel.
Linux version 2.2.14-rmk5-np17-empeg52 (rob@aphex) (gcc version 2.95.3 20010315 (release)) #11 Tue Apr 1 18:49:59 BST 2003
Processor: Intel StrongARM-1100 revision 11
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 7, serial number 90000805)
Command line: mem=12m
Calibrating delay loop... 207.67 BogoMIPS
Memory: 10968k/12M available (964k code, 20k reserved, 332k data, 4k init)
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 16384 bhash 16384)
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Linux-IrDA: IrCOMM protocol ( revision:Tue May 18 03:11:39 1999 )
ircomm_tty: virtual tty driver for IrCOMM ( revision:Wed May 26 00:49:11 1999 )
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is 67706d65 'empg'
Scheduling custom logo.
empeg display initialised.
empeg dsp audio initialised
empeg dsp mixer initialised
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0
empeg remote control/panel button initialised.
empeg usb initialised, PDIUSBD12 id 1012
empeg state support initialised 0089/88c1 (save to d0005d00).
empeg RDS driver initialised
empeg power-pic driver initialised (first boot)
RAM disk driver initialized: 16 RAM disks of 4096K size
empeg single channel IDE
Probing primary interface...
hda: TOSHIBA MK8025GAS, ATA DISK drive
hda: TOSHIBA MK8025GAS, ATA DISK drive
hda: TOSHIBA MK8025GAS, ATA DISK drive
hda: TOSHIBA MK8025GAS, ATA DISK drive
hda: TOSHIBA MK8025GAS, ATA DISK drive
hda: TOSHIBA MK8025GAS, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: TOSHIBA MK8025GAS, 76319MB w/0kB Cache, CHS=9729/255/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:12:03:25
Partition check:
hda: hda1 < hda5 hda6 > hda2 hda3 hda4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\done.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump... VFS: Can't find an ext2 filesystem on dev ide0(3,4).
player.cpp : 385:empeg-car 2.00 2003/04/01.
! tags.cpp : 61:Failed to open tags (0xc0041002).
Prolux 4 empeg car - 2.1434 Mar 26 2003
Vcb: 0x4054d000
-----------------------------------------------------------------

Top
#214921 - 29/04/2004 03:25 Re: HD 80GB Toshiba upgrade issues, ext2 not found?? [Re: ratscrew]
Roger
carpal tunnel

Registered: 18/01/2000
Posts: 5683
Loc: London, UK
OK, so your music partition isn't formatted. How did you format the new drive? You used the builder image, yes?

Either try that again, or follow these instructions to format it manually. You'll have to replace every instance of "hdc" with "hda" if you've got the disk installed as the first drive in your empeg.

_________________________
-- roger

Top
#214922 - 29/04/2004 04:52 Re: HD 80GB Toshiba upgrade issues, ext2 not found?? [Re: Roger]
pgrzelak
carpal tunnel

Registered: 15/08/2000
Posts: 4859
Loc: New Jersey, USA
Greetings!

It would be a good idea to try and capture a log of the build as it is going. There is a known weirdness with the builder (does anyone know if it is a proven bug) where you sometimes have to run it more than once.
_________________________
Paul Grzelak
200GB with 48MB RAM, Illuminated Buttons and Digital Outputs

Top
#214923 - 29/04/2004 11:52 Re: HD 80GB Toshiba upgrade issues, ext2 not found?? [Re: Roger]
ratscrew
new poster

Registered: 30/10/2000
Posts: 12
Thanks so much Roger! Seems like there was an issue with the .upgrade file writing to my drive. Now all is well and i have 74 gb free in emplode!! Thanks so much!

Chris

Top