Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#281715 - 19/05/2006 19:05 Linux-friendly Gigabit NIC recommendation?
hybrid8
carpal tunnel

Registered: 12/11/2001
Posts: 7738
Loc: Toronto, CANADA
Any recommendations for a linux-friendly (and readily available) PCI gigabit NIC?

A few local shops have the following:

D-Link DGE-530T 10/100/1000Mbps Gigabit PCI Network Adapter

SysKonnect SK 9521 V2.0 Gigabit Network Adapter 32 Bit 10/100/1000Base-T

Trendware - TEG-PCITXR - 10/100/1000Mbps Copper Gigabit PCI Adapter

Netgear - GA311 - 10/100/1000Mbps Gigabit PCI Adapter

Intel Pro 1000/GT Desktop 10/100/1000 Gigabit PCI Network Adapter

Mach Speed - SK-9521 - 10/100/1000 Gigabit PCI Ethernet Adapter

Power Up 10/100/1000 Gigabit PCI Network Adapter

Gigafast - GE1000-AXP - 10/100/1000 Gigabit PCI Network Adapter

Sabrent 10/100/1000 Gigabit PCI Adapter

Linksys - EG1064 - 10/100/1000 Gigabit Network Adapter (pricey at over $85)

Linksys - EG1032 - Instant Gigabit Network PCI Adapter

U.S. Robotics - USR997902 - 10/100/1000 Gigabit PCI Ethernet Adapter

Hiro - H50070 - 10/100/1000 32-bit Low Profile PCI Network Adapter

Zonet - ZEN3300E- 10/100/1000 Gigabit PCI Network Adapter

(I left out some Intel and 3Com models that were over $150)

Thanks,
Bruno
_________________________
Bruno
Twisted Melon : Fine Mac OS Software

Top
#281716 - 19/05/2006 20:57 Re: Linux-friendly Gigabit NIC recommendation? [Re: hybrid8]
wfaulk
carpal tunnel

Registered: 25/12/2000
Posts: 16706
Loc: Raleigh, NC US
I imagine that any that say "Broadcom" on the chip will work gangbusters. If you can actually see the card in the packaging, that is.
_________________________
Bitt Faulk

Top
#281717 - 19/05/2006 22:52 Re: Linux-friendly Gigabit NIC recommendation? [Re: wfaulk]
hybrid8
carpal tunnel

Registered: 12/11/2001
Posts: 7738
Loc: Toronto, CANADA
That's going to be a challenge... Anyone know if any of the above use a broadcom part?
_________________________
Bruno
Twisted Melon : Fine Mac OS Software

Top
#281718 - 20/05/2006 01:15 Re: Linux-friendly Gigabit NIC recommendation? [Re: hybrid8]
mlord
carpal tunnel

Registered: 29/08/2000
Posts: 14484
Loc: Canada
Get the Intel part. Probably any of those listed will work, though, but I actually *have* some Intel GigE stuff here, so I know those are fine, and the driver is from Intel themselves.

Also supported in the current kernels: MyriCOM, NS-DP83820, PE Hamachi GNIC-II, DLink DL2000, Alteon AceNIC/3Com 3C985/NetGear GA620, PE Yellowfin, Realtek 8169, SIS190, SysKonnect SK-98xx/SK-95xx, Marvell Yukon (including a zillion relabelled versions from 3Com, Marvell, Belkin, etc..), etc..

See attached kernel config file for a more complete list, with a few more notes on which ones have Jumbo frames, do NAPI (fast polling for higher throughput), etc..

Pretty much everything seems to be supported.

Cheers


Attachments
281754-gige.txt (462 downloads)


Top
#281719 - 20/05/2006 19:33 Re: Linux-friendly Gigabit NIC recommendation? [Re: hybrid8]
SuperQ
addict

Registered: 13/06/2000
Posts: 429
Loc: Berlin, DE
intel, that's about the only one I would get out of that list..

broadcom tg3 based also work well, but most of those on the list will be cheapo chipsets.
_________________________
80gig red mk2 -- 080000125
(No, I don't actually hate Alan Cox)

Top