Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Page 18 of 18 < 1 2 ... 16 17 18
Topic Options
#372504 - 18/12/2019 21:40 Re: BlueGigaEmpeg [Re: tfabris]
JBjorgen
carpal tunnel

Registered: 19/01/2002
Posts: 3582
Loc: Columbus, OH
Yeah, it was totally spur of the moment, because the Empeg usually lives on my desk at work. One of my co-workers brought in all his soldering stuff and set it up to repair some Christmas ornaments with bad capacitors on his lunch break. Since it was there and all setup, I figured I would go ahead and do the internal wiring for the BlueGigaEmpeg. I never got back to it today as things got busy at work, so I'll let you know when I finish up.
_________________________
~ John

Top
#372508 - 19/12/2019 14:33 Re: BlueGigaEmpeg [Re: tfabris]
mlord
carpal tunnel

Registered: 29/08/2000
Posts: 14472
Loc: Canada
Originally Posted By: tfabris
Anyone have a good way to clean up the work after fluxing and soldering?


I just use Q-Tips (cotton swabs) doused in alcohol. If the joints have rough bits, I smooth them over with more solder/heat (and FLUX!) first.

Cheers

Top
#372510 - 19/12/2019 17:56 Re: BlueGigaEmpeg [Re: mlord]
tfabris
carpal tunnel

Registered: 20/12/1999
Posts: 31563
Loc: Seattle, WA
Yeah, I have tried Q-tips as well, but it inevitably leaves little cotton strands all over my work, so I have to go scanning for them. smile
_________________________
Tony Fabris

Top
#372511 - 20/12/2019 14:06 Re: BlueGigaEmpeg [Re: tfabris]
gmarsh
new poster

Registered: 29/04/2005
Posts: 18
Loc: NS, Canada
Day job method:

I usually give everything a good soak in good flux remover (eg, MG Chemicals 413B) using a brush or Q-tip to get any burnt or big 'goobers' of flux loose. Then dab off as much of the flux remover as possible using a paper towel, and give a second soak in flux remover.

Then finish with a wash in deionized water, finally blow the water off with compressed air.

Top
#372512 - 20/12/2019 21:41 Re: BlueGigaEmpeg [Re: gmarsh]
mlord
carpal tunnel

Registered: 29/08/2000
Posts: 14472
Loc: Canada
And.. how is the RAM upgrade? laugh

Top
#372513 - 22/12/2019 04:28 Re: BlueGigaEmpeg [Re: mlord]
gmarsh
new poster

Registered: 29/04/2005
Posts: 18
Loc: NS, Canada
Originally Posted By: mlord
And.. how is the RAM upgrade? laugh

The Empeg (and RAM) is current sitting in a box in my basement.

Just moved into a new house today smile Still got a bunch of moving and setup and other stuff to get up to, when that's done I'll do the RAM upgrade and try out the SATA adapter.

Top
Page 18 of 18 < 1 2 ... 16 17 18