Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#7361 - 03/12/1999 13:18 Bug / Hardware Problem with tuner on empeg #314
Lemmy
member

Registered: 03/12/1999
Posts: 118
Loc: Germany
I have at least three frequencies where something is emitting strong (at least 3 bars, one with 5 bars on the display) Rf noise.
5 bars @ 96.00 MHz, 3 Bars @ 98.80 MHz, 101.60 MHz, 104.40 MHz, 107.30 MHz. The noise @ 96 MHz is at least 200KHz wide, as it
affects 95.90-96.10 MHz. And one of my favorite radio stations is @ 95.90 MHz...

as I'm writing this, theunit is sitting on my desk, without the car
mount, so there's no antenna at all...



_________________________
--- Mk. I Blue 4G Serial [dont remember] Mk. II Green 6G+20G Serial 080000372

Top
#7362 - 03/12/1999 14:21 Re: Bug / Hardware Problem with tuner on empeg #314 [Re: Lemmy]
andy
carpal tunnel

Registered: 10/06/1999
Posts: 5916
Loc: Wivenhoe, Essex, UK
I too get five bars at 96.0 (but strangely there is no audio at all). I can pick up Capital well with five bars at 95.8 though.
(this is with the unit sitting next to me on my desk with my finger against the aerial terminal, which tends to give me fairly good reception)

__
Unit serial number 47 (was 330 in the queue)...
_________________________
Remind me to change my signature to something more interesting someday

Top