My empeg has now started to do very strange things.
This was one of the units that had the bad batch of initial memory that Hugo replaced by hand.

Anyway, this is what happens when the empeg player is started manually from the command-line:


empeg:/empeg/bin# logout
Shell exit
Starting player
empeg-car 1.02.
3a8e70f8 DHCP Our mac is 00:02:d7:10:01:c1
3a8e70f8 DHCP Our address is 255.255.255.255
3a8e70f8 DHCP Broadcast address is 255.255.255.255
3a8e70f8 DHCP Current IP address is 255.255.255.255
3a8e70f8 DHCP Sending DHCP discover
player: memory violation at pc=0x02063b40, lr=0x00000003 (bad address=0x0fc6f0b0
, code 2)
pc : [<02063b40>] lr : [<00000003>]
sp : be3ff994 ip : 02160714 fp : be3ffd48
r10: be3ffd00 r9 : 00009800 r8 : 06fe0000
r7 : 020ea610 r6 : 00000002 r5 : 02162b20 r4 : 020e87a0
r3 : 036e12a8 r2 : 00db84a8 r1 : 020e06ae r0 : 00000000
Flags: nZCv IRQs on FIQs on Mode USER_32 Segment user
Control: D030117D Table: D030117D DAC: 00000015
Function entered at [<0204a3dc>] from [<0204e84c>]
r10 = BFFFFF64 r9 = 02114EA8 r8 = 02104FB4 r7 = 00002C0C
r6 = 02114EC0 r5 = 02114EA8 r4 = 00000000
Function entered at [<0204e830>] from [<0200a484>]
r4 = BE3FFD64
Function entered at [<0200a3d4>] from [<02068904>]
r5 = 0000000C r4 = BE3FFE40
Function entered at [<02068844>] from [<0209f69c>]
r4 = 00000000
Function entered at [<0209e690>] from [<02068688>]
r8 = 02111EBC r7 = 02111EA8 r6 = 0200A3D4 r5 = 00000003
r4 = 00000001
Function entered at [<020685d8>] from [<0209f69c>]
r5 = 00000000 r4 = 00000000
Function entered at [<0206c2d4>] from []
Function entered at [<0206c2d4>] from []
Function entered at [] from []
Function entered at [<0000ee15>] from [<00000000>]
Unable to handle kernel paging request at virtual address 0000ee19
memmap = D0300000, pgd = c0b00000
*pgd = d0305001, *pmd = d0305001, *pte = 00000000, *ppte = 00000000
Internal error: Oops: 2
CPU: 0
pc : [] lr : []
sp : c035ff48 ip : c035ff04 fp : c035ff90
r10: 00000002 r9 : c0bb60e0 r8 : 0000000c
r7 : 00000000 r6 : 0000ee15 r5 : 00000000 r4 : e1a0c00d
r3 : 60000013 r2 : c01021e4 r1 : 00000001 r0 : e1a0bffd
Flags: nZCv IRQs on FIQs on Mode SVC_32 Segment user
Control: D030117D Table: D030117D DAC: 00000015
Process player (pid: 689, stackpage=c035f000)
Stack:
c035ff20: c001a5e0 c00e3b
38
c035ff40: 60000013 ffffffff c0bb60f8 c0bb5a20 c035ffb8 c035e000 0fc6f0b0 c00129
38
c035ff60: 0fc6f0b0 00000002 c035ffb8 00000005 0fc6f0b0 00000000 00000002 000098
00
c035ff80: be3ffd00 c035ffb4 c035ff94 c0012e28 c00126f0 c0100978 02162b20 000000
02
c035ffa0: 020ea610 06fe0000 00000000 c035ffb8 c000b008 c0012d50 00000000 020e06
ae
c035ffc0: 00db84a8 036e12a8 020e87a0 02162b20 00000002 020ea610 06fe0000 000098
00
c035ffe0: be3ffd00 be3ffd48 02160714 be3ff994 00000003 02063b40 60000010 ffffff
ff
Backtrace:
Function entered at [] from []
r10 = BE3FFD00 r9 = 00009800 r8 = 00000002 r7 = 00000000
r6 = 0FC6F0B0 r5 = 00000005 r4 = C035FFB8
Function entered at [] from []
r8 = 06FE0000 r7 = 020EA610 r6 = 00000002 r5 = 02162B20
r4 = C0100978
Code: ebfcda25 e2440010 (e5961004) e1a035a1 e59f20cc
Restored terminal settings
Remounting first music partition read-only
Remounting second music partition read-only
Abnormal player termination
Player received signal 11
Starting bash.
empeg:/empeg/bin#


And on a power-on process, the unit simply recycles that process above and the front drisplay goes from the Empeg Startup screen, Loading Music Databases... bunch of text, then the player display pops up, then it jumps batch to the startup screen again, and does this forever.

Here is an included hw test capture:


empeg-car bootstrap v1.00 20000601 ([email protected])
If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...
0000 empeg-car board test version 0.04
0100 ram test starting
0110 testing ic 1 (0-3mb, low word)
0120 testing ic 2 (0-3mb, high word)
0130 testing ic 3 (4-7mb, low word)
0140 testing ic 4 (4-7mb, high word)
0150 testing ic 19 (8-11mb, low word)
0160 testing ic 32 (8-11mb, high word)
01f0 ram test done
0200 ide detect
0210 command issued
0220 drive id IBM-DARA-218000
02f0 ide ok
0300 dsp/i2c test
03f0 dsp/i2c ok
0400 temperature detect
0410 temperature is 33
04f0 temperature ok
0500 usb detect
0510 usb rev 1012
05f0 usb ok
0600 ethernet detect
0610 ethernet rev 334b
06f0 ethernet ok
0700 cs4231 detect
0710 cs4231 rev a0
07f0 cs4231 ok
00f0 tests complete


Also this is being sent in as an email.

Any ideas?
Thanks

Smoker_Man
#080000449 MkII - 36Gb Blue