It should be possible to run both 1.1 and 2.0b1 at the same time. 2.0b1 uses a configfile /etc/displayserver.conf where you can set the portnumber to use.
if you set it to 81, you can access the empeg through : http://[ip of empeg] for 1.1 and http://[ip of empeg]:81 for 2.0
The installer doesn't change the init script. the only files affected are /etc/profile, /empeg/var/config.ini, /etc/displayserver.conf and the /opt structure



Frank van Gestel