Looks like I'd better choose carefully.
I expect I may get a 10/100 hub initially and upgrade the network cards as and when I have a few shillings lying around.
The main problem I see is that at the minute, some of the computers are spread around the house (although 3 + the empeg will be in one room!) and the coax is tracked up the walls. Some hubs can have a BNC connector in addition to the RJ45s, so could I have a couple of machines running off the hub's BNC connector with the rest on RJ45?
The empeg is only 10Mbs anyway as I recall, would that not cause problems on a 100BaseT network?
(I set up the network at home on the cheap several years back, and coax has served me ok so far, so I have never had to worry about 10/100/RJ45/hubs etc hence all the questions!)

Geoff
---- -------
Got one of the first Mark 2 empegs...
_________________________
Geoff
---- -------
Mk1 Blue - was 4GB, now 16GB
Mk2 Red - was 12GB, now 60GB