7) Make sure your Ethernet card is set-up for half duplex, or emplode will a) run slower or b) fall over with 0xfffff703 errors:
. Go to Control Panel -> Network -> [your network card] -> Properties -> Advanced
. Property 'Duplex Mode' should say 'Half Duplex'; change this if necessary

NB: an update of 72.8 MB (12 tracks) took 4:02 minutes using Ethernet vs 5.25 minutes via USB


Henno
mk2 nr 6
_________________________
Henno mk2 [orange]6 [/orange]nr 6