In reply to:
I can't use the static IP option as my home Ethernet hubs are connected to the cable provider, and I can't find out from the empeg display what IP address it has picked up from DHCP.
Here's a workaround if the empeg's on the same Hub as your computer.
In w2k, you can assign two IP numbers to one network card. SO, right click/property your network card's settings, right click tcp/ip, advanced, add the IP address 192.168.0.1, subnet 255.255.255.0
Now assign a number to empeg (such as 192.168.0.23)
tell emplode that empeg is on that number, and tada:)
-mark
...proud to have owned one of the first Mark I units