hmm. Not sure I follow you.

I've got the last leg of the pot (furthest from the screw adjuster) attached with the left leg of the regulator (ADJ in the diagram), and one end of the 3.3K resistor.

The other end of the 3.3K res is attached to the pos side of the 10UF cap, the mid leg of the VR, the last leg switch side A , and one side of the 470 res.

The other 2 legs of the pot (mid and front) are connected to one side of the .1uf Cap, the neg leg of the 10UF cap, the other side of the 470 res, and the ground out wire.

Should I switch the wires as they are attached to the pot?
_________________________
...all I ask is a tall ship and a star to steer her by.