OK. I"m back.. I copied and pasted all the commands but nothing came up.. Listen... what would be the normal procedure for adding another drive?? This is what I did.

1.Physically Install it with the slave jumper, slave is plugged into the middle plug in the cable
2. run "car2-builder-20011022" then run the "consumer 2.00" update.
3. boot up and it works but emplode doesn't see the second drive (the slave 20gig drive)

q
Switching to shell-player loop
Starting bash.
no shell!
Shell exit
player.cpp : 385:empeg-car 2.00 2003/04/01.
Prolux 4 empeg car - 2.1434 Mar 26 2003
Vcb: 0x4086d000
cd /drive0/var
ls
cd /drive0/fids
ls
cd /drive1
ls
cd /drive1/var
ls
cd /drive1/fids
ls