Sorry, I've just been a little frazzled by this whole process. It's a little nerve wracking to do on my only empeg.

So I tried removing the IBM disk from the cable and plugging in the WD drive. When I tried opening emplode, I had problems. It saw the empeg, and it started going through the process. When it got to the "checking media" part, I got a Windows error and emplode crashed. So I fired up hyperterminal and this is what I saw:

Code:
Probing primary interface...Poll result=0 on fd=514): Po
hda: WDC WD800VE-07HDT0, ATA DISK drive14 
hda: WDC WD800VE-07HDT0, ATA DISK drive
Stressing /dev/hd
hda: WDC WD800VE-07HDT0, ATA DISK drive


ide0 at 0x000-0x007,0x038 on irq 6
hda: WDC WD800VE-07HDT0, 76319MB w/8192kB Cache, CHS=9729/255/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:10:01:9
8
Partition check:
 hda: hda1 < hda5 hda6 > hda2 hda3 hda4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...change_root: old root has d_count=1
okay
Freeing unused kernel memory: 4k initVFS: Can't find an ext2 filesystem on dev i
de0(3,4).
  player.cpp  : 385:empeg-car 2.00 2003/04/01.
! tags.cpp :  61:Failed to open tags (0xc0041002).
Prolux 4 empeg car - 2.1434 Mar 26 2003
Vcb: 0x4054d000


What does it all mean?
_________________________
Matt