Sure! I grounded the harness "Earth" wire directly to the chassis ground stud located at the front of the center console. On my car, it was a painted 10mm hex nut on the passenger side about 7 inches in front of the airbag computer. Mine is a 2001 so it might be slightly different than other years, I dunno. I made sure the sled was isolated from chassis ground, but I don't know if that contributed - regrounding the empeg seemed to clear up the problem immediately.

I don't know where the Becker is grounded as I couldn't remove it, but I assume they used the factory ground wire.

Hope that helps. Install porn coming soon!