The only problem is that I'm having trouble locating documentation on the Mark2 pinouts

Top row, starting from left looking into back of empeg

Pin 1 - Permanent +12V (memory)
Pin 2 - Aux power (amp remote) (1A max draw, we mean it)
Pin 3 - Tuner module multiplexed audio in/DAB TTL level data
Pin 4 - Tuner module signal level in/DAB TTL level word clock
Pin 5 - DAB TTL level data clock
Pin 6 - Tuner module TTL level serial RX line
Pin 7 - Tuner module TTL level serial TX line
Pin 8 - Serial port RS232 level RX line
Pin 9 - Serial port RS232 level TX line
Pin 10 - Serial port RS232 level CTS line
Pin 11 - Serial port RS232 level DCD line
Pin 12 - Ground (microphone)

Bottom row, starting from left looking into empeg

Pin 13 - Ground (power)
Pin 14 - Ignition sense
Pin 15 - Rear right out
Pin 16 - Rear ground
Pin 17 - Rear left out
Pin 18 - Front right out
Pin 19 - Front ground
Pin 20 - Front left out
Pin 21 - CD right in
Pin 22 - CD ground
Pin 23 - CD left in
Pin 24 - Microphone in



Patrick


Opinions expressed in this email may contain up to 42% water by weight, and are mine. All mine.