Build of second drive done, going to install player software and hijack. Thought I'd post the log.

Code:
e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux..................................... done, booting the kernel.
Linux version 2.2.17-rmk5-np17-empeg52-hijack-v488 ([email protected]) (gcc version 2.95.3 20010315 (release)) #2 Fri Feb 15 10:29:26 EST 2008
Processor: Intel StrongARM-1100 revision 11
Checking for extra DRAM:
c1000000: wrote ffffffff, read e28cc001
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 9, serial number 30102438) 16MB DRAM
Command line: mem=16m
Calibrating delay loop... 207.67 BogoMIPS
Memory: 15000k/16M available (992k code, 20k reserved, 368k data, 4k init)
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 16384 bhash 16384)
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is 20706d65 'emp '
Found custom animation at offset 0x9bb84
Tuner: loopback=1, ID=-1
show_message("Hijack v488 by Mark Lord")
empeg display initialised.
empeg dsp audio initialised
empeg dsp mixer initialised
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0
empeg remote control/panel button initialised.
empeg usb initialised, PDIUSBD12 id 1012
empeg state support initialised 0089/88c1 (save to d0005080).
empeg RDS driver initialised
empeg power-pic driver initialised
RAM disk driver initialized:  16 RAM disks of 4096K size
empeg single channel IDE
Probing primary interface...
ide_data_test: wrote 0x0000 read 0x0000
ide_data_test: wrote 0xffff read 0x0000
ide_data_test: wrote 0xaaaa read 0x0000
ide_data_test: wrote 0x5555 read 0x0000
ide_data_test: wrote 0x0000 read 0x0000
ide_data_test: wrote 0xffff read 0x0000
ide_data_test: wrote 0xaaaa read 0x0000
ide_data_test: wrote 0x5555 read 0x0000
ide_data_test: wrote 0x0000 read 0x0000
ide_data_test: wrote 0xffff read 0x0000
ide_data_test: wrote 0xaaaa read 0x0000
ide_data_test: wrote 0x5555 read 0x0000
ide_data_test: wrote 0x0000 read 0xffff
ide_data_test: wrote 0xffff read 0xffff
ide_data_test: wrote 0xaaaa read 0xffaa
ide_data_test: wrote 0x5555 read 0xff55
hda: TS32GSSD25-M, ATA DISK drive
ide_data_test: wrote 0x0000 read 0xffff
ide_data_test: wrote 0xffff read 0xffff
ide_data_test: wrote 0xaaaa read 0xffaa
ide_data_test: wrote 0x5555 read 0xff55
hda: TS32GSSD25-M, ATA DISK drive
ide_data_test: wrote 0x0000 read 0xffff
ide_data_test: wrote 0xffff read 0xffff
ide_data_test: wrote 0xaaaa read 0xffaa
ide_data_test: wrote 0x5555 read 0xff55
hda: TS32GSSD25-M, ATA DISK drive
ide_data_test: wrote 0x0000 read 0xffff
ide_data_test: wrote 0xffff read 0xffff
ide_data_test: wrote 0xaaaa read 0xffaa
ide_data_test: wrote 0x5555 read 0xff55
hda: TS32GSSD25-M, ATA DISK drive
ide_data_test: wrote 0x0000 read 0xffff
ide_data_test: wrote 0xffff read 0xffff
ide_data_test: wrote 0xaaaa read 0xffaa
ide_data_test: wrote 0x5555 read 0xff55
hda: TS32GSSD25-M, ATA DISK drive
ide_data_test: wrote 0x0000 read 0xffff
ide_data_test: wrote 0xffff read 0xffff
ide_data_test: wrote 0xaaaa read 0xffaa
ide_data_test: wrote 0x5555 read 0xff55
hda: TS32GSSD25-M, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: TS32GSSD25-M, 30560MB w/0kB Cache, CHS=62090/16/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:26:09:86
Partition check:
 hda: hda1 < hda5 hda6 > hda2 hda3 hda4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... Freeing unused kernel memory: 4k init+ /bin/mount -n /proc
+ log 'Builder image'
+ echo 'Builder image'
Buildeshow_message("Builder image")
r image
+ echo 'POPUP 9999 Builder image'
+ DRIVE1=
+ '[' -e /proc/ide/hdb -a -e /proc/ide/hdc ']'
+ '[' -e /proc/ide/hdb ']'
+ '[' -e /proc/ide/hdc ']'
+ /bin/mount -n -t ext2 -o ro,nocheck /dev/hda4 /drive0
+ '[' -d /drive0/fids ']'
+ /bin/umount /drive0
+ /bin/mkswap /dev/hda6
Setting up swapspace version 0, size = 16994304 bytes
+ /bin/swapon /dev/hda6
Adding Swap: 16596k swap-space (priority -1)
+ /bin/mkswap /dev/hda3
Setting up swapspace version 0, size = 17027072 bytes
+ /bin/swapon /dev/hda3
Adding Swap: 16628k swap-space (priority -2)
+ log 'Tuning hda5'
+ echo 'Tuning hda5'
Tuning show_message("Tuning hda5")
hda5
+ echo 'POPUP 9999 Tuning hda5'
+ /bin/tune2fs -c -1 -i0 /dev/hda5
tune2fs 1.17, 26-Oct-1999 for EXT2 FS 0.5b, 95/08/09
Setting maximal mount count to -1
Setting interval between check 0 seconds
+ makedrive hda4 /drive0
+ dev=/dev/hda4
+ log 'Making hda4 filesystem'
+ echo 'Makishow_message("Making hda4 filesystem")
ng hda4 filesystem'
Making hda4 filesystem
+ echo 'POPUP 9999 Making hda4 filesystem'
+ /bin/mkfs.ext2 -v -s 1 -i 131072 -m 0 /dev/hda4
mke2fs 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09
ext2fs_check_if_mount: No such file or directory while determining whether /dev/hda4 is mounted.
Linux ext2 filesystem format
Filesystem label=
243840 inodes, 31210200 blocks
0 blocks (0.00%) reserved for the super user
First data block=1
Block size=1024 (log=0)
Fragment size=1024 (log=0)
3810 block groups
8192 blocks per group, 8192 fragments per group
64 inodes per group
Superblock backups stored on blocks:
        8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409, 663553,
        1024001, 1990657, 2809857, 5120001, 5971969, 17915905, 19668993,
        25600001,

Writing inode tables:  258/3810Dead temp.sensor, status=0x00
done
Writing superblocks and filesystem accounting information: done
+ log 'Tuning hda4'
+ echo 'Tuning hda4'
Tuning hda4
+ echo 'POPUP 9999 Tuning hda4'
show_message("Tuning hda4")
+ /bin/tune2fs -c -1 -i0 /dev/hda4
tune2fs 1.17, 26-Oct-1999 for EXT2 FS 0.5b, 95/08/09
Setting maximal mount count to -1
Setting interval between check 0 seconds
+ /bin/sync
+ /bin/sync
+ log 'Mounting hda4'
+ echo 'Mounting hda4'show_message("Mounting hda4")

Mounting hda4
+ echo 'POPUP 9999 Mounting hda4'
+ /bin/mount -n -o rw,nocheck /dev/hda4 /drive0
+ /bin/sync
+ /bin/sync
+ log 'Making directories'
+ echo 'Making dishow_message("Making directories")
rectories'
Making directories
+ echo 'POPUP 9999 Making directories'
+ /bin/mkdir /drive0/fids
+ /bin/mkdir /drive0/var
+ echo '[hijack]'
+ log 'Remounting ro'
+ echo 'Remountingshow_message("Remounting ro")
 ro'
Remounting ro
+ echo 'POPUP 9999 Remounting ro'
+ /bin/mount -n -o remount,ro /dev/hda4 /drive0
+ /bin/sync
+ /bin/sync
+ log 'hda4 completed'
+ echo 'hda4 completeshow_message("hda4 completed")
d'
hda4 completed
+ echo 'POPUP 9999 hda4 completed'
+ '[' '' '!=' '' ']'
+ /bin/swapoff /dev/hda3
+ log 'Zeroing hda3'
+ echo 'Zeroing hda3'
Zeroing show_message("Zeroing hda3")
hda3
+ echo 'POPUP 9999 Zeroing hda3'
+ /bin/cat /dev/zero
/bin/cat: write error: No space left on device
+ /bin/swapoff /dev/hda6
+ log 'Done!  Testing disk..'
+ echo 'Done!  Testing disk..'
Done!  Testing disk..
+ echo 'POPUP 9999 Done!  Testing disk..'
show_message("Done!  Testing disk..")
+ /sbin/hdstress
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Speed checking /dev/hda3
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Read/write of 8Mb took 9.65 seconds
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Drive length is 62586880 blocks, seek testing
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Seek test complete:  2.01 seconds.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=1 on fd=5
hdstress.cpp   194 (   33): Read a button press
hdstress.cpp   194 (   33): Read a button press
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Speed checking /dev/hda3
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Read/write of 8Mb took 3.92 seconds
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Drive length is 62586880 blocks, seek testing
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Seek test complete:  2.02 seconds.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=1 on fd=5
hdstress.cpp   194 (   33): Read a button press
hdstress.cpp   194 (   33): Read a button press
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Speed checking /dev/hda3
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Read/write of 8Mb took 6.78 seconds
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Drive length is 62586880 blocks, seek testing
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Seek test complete:  2.01 seconds.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Speed checking /dev/hda3
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Read/write of 8Mb took 3.98 seconds
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Drive length is 62586880 blocks, seek testing
hdstress.cpp   189 (   33): Poll result=1 on fd=5
hdstress.cpp   194 (   33): Read a button press
hdstress.cpp   194 (   33): Read a button press
Seek test complete:  2.02 seconds.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning down.
hdstress.cpp   189 (   33): Poll result=0 on fd=5
Stressing /dev/hda: Spinning up.
hdstress.cpp   189 (   33): Poll result=0 on fd=5


Tony, I thought it worth mentioning that this is Mark's Big Disk Builder. In the FAQ it states that this version doesn't stress test the drives after build when in fact it does.
_________________________
Steve