Added the 1st drive back in and hdparm'd it. Exactly the same (as expected) just a different serial no.

It appears that "hdparm.bin -I /dev/hda" works but "hdparm.bin -I /dev/hdb" doesn't when two devices are connected. I'll have to manually swap each drive into the master position to effect any changes it seems.

Originally Posted By: mlord
Try hdparm -W0 -K1 (top link on Hijack page)
on them (once), and then send them some more tunes.


I haven't done this yet as your post appeared to suggest holding off on these commands until I'd posted the results of "-I"
_________________________
Steve