Registered: 27/09/2000
Posts: 89
Loc: California, USA
In reply to:
If your dimmer is set at say 50% and the brightness looks like 50% and you turn the brightness to 60% the dimmer may "look like its at 0% or 70 or whatever". Then say if you turn it to 70% it may look like its at 100%, when you turn it to 80% it may look like its at 80 percent, then when you turn it to 90, it may look like its at 0%. Then when you turn it to 100% it may "look like its at 100% or look like its at 50% or whatever. My point is, and I'm not using the volume knob to adjust it, if you turn the dimmer up higher, the brightness of the display may acutally go DOWN OR UP. If the dimmer is set to 100% and you keep pressing the "right arrow button, the dimmer will vary in brightness (looks like it changes from about 50% brightness to about 110% brightness) EVEN though it keeps saying 100%
Yes, mine does the exact same thing whether I'm using the buttons or the rotary controller, but mine does it regardless of temperature. I'm sending my Empeg in to have it checked out.
Previous Topic
Index
