ah, i can see a difference already.

the fuse i was testing is between the 4 pin input plug and the coil. between 3&4 on your (very helpful) diagram.

where you have a fuse (fig2), i have a black component. markings on it are

22-35
LD 2

the empeg in question is a empeg car, ser No080000166 if that makes a difference.

sorry if i wasn't clear in the initial post, when i saw your pic with the screw and the fuse, i only saw the one in mine and didn't think to re-check your pic.

Hugh

will test the, other bits now, they all look the same.