Hijack shows the "raw" capacity as reported by the drive and doesn't care what partitions are set up as I understand it.

Emplode shows the partition capacity and this is probably wrong.

So I would say from what you're telling us, your build is not ok.

run these two commands:
fdisk -l /dev/hda
fdisk -l /dev/hdc


Edited by Shonky (28/03/2010 21:53)
Edit Reason: corrected type in command 1 != l but looks the same in the post edit font...
_________________________
Christian
#40104192 120Gb (no longer in my E36 M3, won't fit the E46 M3)